Aluminium Composite Panels

Yes, we have our own team of sign installers as well as a strong network of qualified sign contractors to assist with the installation of our projects involving any quantity of ACM panels, from single panels to multiple ones forming a large sign. In many cases the use of high reach equipment is required when ladders are not applicable. We can advise on the best options for all types of signage as well as work with you regarding required permits. The requirements of business signage vary greatly depending on which council you are in (Sydney, Brisbane, Canberra, Melbourne, etc.).

Our signs are installed in many locations – indoors, outdoors, and everywhere in between. Outdoor installations most commonly involve specific glue for ACM or silicon as well as the use of screws to make sure the panels stay in place. For inside installations, double sided tape can be used depending on the size. You also have the option of pins – metal standoffs – which are stylish and easy to install.

Yes we have flatbed CNC router technology which allows us to cut to most shapes ACM panels. Extensively used for 3d flat signage, but these can also be to cut panels in large scale precisely.

Yes, a lot of our business sign projects involve cutting round corners and holes accordingly on ACM panels. The pre-drilled holes make the installation process considerable faster. As a top-rated sign vendor, we offer many options.

Graffiti can, unfortunately, be a problem on shops in Sydney, Melbourne, and other big cities in Austrlia. Thus, we can apply anti-graffiti lamination at an extra cost. It is an excellent option to make sure you can easily wipe off the panels when vandals spray them instead of having to reprint them all. Anti-graffiti lamination for signs comes only in gloss finish only.

Certainly, the more signs you buy, the better the price we can provide you with. More of the same print also assist reducing the cost vs multiple artwork setup. We offer unbeatable trade prices too, feel free to call us to discuss your requirements.

A full sheet of standard ACM is 2440mm x 1220mm, so we can custom cut to any size within these dimensions. Oversized panels – We can’t direct print on these ones, we can only apply vinyl to them. The maximum size we can supply is 3000mm x 1500mm. Please note, oversized panels will have a considerable higher cost for transportation, we are limited to shipping oversized panels within Sydney Metro.

We work with a wide range of colours with all basic ones available. The most common coulours for signage are printable white ACM sheets as well as black and brushed finished ACM panels.

In most cases, we have a quick turnaround of 1-3 days after artwork approval. Depending on the complexity of the project involved and with the use of CNC router cutting of complex shapes, V grooving ACM or large size orders, the standard turnaround is 5-7 days for dispatch.

As a standard, we do laminate all ACM panel prints with a matte or gloss finish. We always recommend having the panels laminated, in particular for outdoor applications. However, we can also do cost-effective printing of them with no lamination. This might work just fine depending on the internal application involved, for shorter term.

We offer very affordable signs, not just in Sydney or Brisbane but throughout Australia. How? We mass produce ACM panels which gives us an edge over other suppliers. Due to the fact that we produce multiple panels, not just a few like many smaller companies, we have economies of scale. This allows us to negotiate better pricing with our suppliers, and pass the cost savings to our customers. Doing direct printing to the majority of ACM panels also gives us the ability to produce fast, with instant curing of the ink, ready to go straight to the lamination process. Following these processes allows us to provide great quality prints at lower costs than most competitors.