Platinum Signs
Drinking Water Sign
PS-GEN143 · Product data sheet
Data sheet
19 September 2026
https://www.platinumsigns.com.au
Description
This Drinking Water sign uses the green safe-condition layout: a white tap filling a cup sits in the upper panel and the DRINKING WATER legend sits below a white divider. The green field and white border follow the AS 1319 safe-condition colour convention for signs that point people to a safe facility. Platinum Signs prints and supplies the sign in 225 × 300 mm and 450 × 600 mm portrait formats. Pick rigid polypropylene or colorbond steel for a fixed installation, corflute for a temporary site, or self-adhesive vinyl for a smooth wall, door or cabinet face. Mount the sign next to the bubbler, tap or dispenser it refers to so the wording is read before the outlet is used. Drilled fixing holes can be added to the polypropylene, colorbond and corflute options, and gloss lamination to the self-adhesive vinyl option, when you order. This is a general workplace identification sign and is not a water quality certificate.
The green background with white symbol and text follows the AS 1319 safe-condition sign convention; the sign identifies a facility and does not certify water quality.
- Category
- Amenity Signs
- Sign selection
- Identifies a water outlet that is safe to drink from.
- Artwork
- Off-the-shelf design supplied as shown
- Product code
- PS-GEN143
Available materials
| Material | Specification |
|---|---|
| Polypropylene (1.6mm) | Rigid 1.6 mm polypropylene sheet with the sign printed flat on one face. Screw through the corners, or fix with double-sided tape onto a flat surface. |
| Colorbond Steel (0.6mm) | Pre-painted steel panel with the sign printed on the coated face. Screw into a wall, post or fence; add drill holes when you order. |
| Corflute (3mm) | Lightweight corrugated plastic board for short-term or temporary placement. Cable-tie through drilled holes, or tape onto a smooth surface. |
| Self-Adhesive Vinyl (Sticker) | Self-adhesive vinyl decal for application directly onto a smooth surface. Clean and dry the surface, then apply the decal from one edge to avoid trapped air. |
Available sizes
- • 225 x 300mm (Small) — Polypropylene (1.6mm) / Colorbond Steel (0.6mm) / Corflute (3mm) / Self-Adhesive Vinyl (Sticker)
- • 450 x 600mm (Large) — Polypropylene (1.6mm) / Colorbond Steel (0.6mm) / Corflute (3mm) / Self-Adhesive Vinyl (Sticker)
Volume pricing — Polypropylene (1.6mm) · 225 x 300mm (Small) (inc. GST)
| Quantity | Unit price | Saving |
|---|---|---|
| 1 | $26.95 | — |
| 5 | $24.79 | -8% |
| 10 | $22.91 | -15% |
| 25 | $20.48 | -24% |
| 50 | $18.33 | -32% |
| 100+ | $16.17 | -40% |
Prices shown for the listed material/size combination and quantities. Savings increase gradually between these quantities. Full configuration pricing is available at https://www.platinumsigns.com.au/safety-signs/amenity/drinking-water-sign.
Frequently asked
What is shown on the sign?
A white tap filling a cup sits above the DRINKING WATER legend on a green panel with a white border.
Which sizes can I order?
The sign is available in 225 × 300 mm and 450 × 600 mm portrait formats, both matching the 3:4 master artwork.
Which material should I choose for outdoors?
Colorbond steel or rigid polypropylene suit outdoor and washdown areas; corflute is intended for temporary use.
Can I get holes for screw fixing?
Yes. Add the drill holes option when ordering any rigid material and the corners are drilled before dispatch.
Does the sign certify that the water is safe?
No. It identifies a drinking water outlet; confirming water quality remains the responsibility of the site operator.