Platinum Signs
Danger All Leads Must Be 2.5m Above Floor or Ground Level Sign
PSS-DAN-003 · Product data sheet
Data sheet
4 November 2026
https://www.platinumsigns.com.au
Description
Enforce electrical safety rules with a sign that clearly states the 2.5 m lead height requirement and meets AS 1319 danger standards. The red header and white text grab attention, ensuring workers register the rule before entering the work area. Offered in corflute, polypropylene, Colorbond steel, or vinyl in four sizes (225×300 mm to 600×900 mm). Lamination and reflective Class 1/2 film are available to boost longevity and visibility in workshops, outdoor sites, and low-light conditions. Pre-drilled holes speed up installation. Trade customers benefit from bulk discounts and Australia-wide delivery. Contact Platinum Signs for custom sizing, volume pricing, or installation advice.
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
- Category
- Danger Signs
- Sign selection
- Confirm against site requirements
- Artwork
- Off-the-shelf design supplied as shown
- Product code
- PSS-DAN-003
Available materials
| Material | Specification |
|---|---|
| Corflute (5mm) | Lightweight corrugated plastic board. Easy to fix to fences, hoarding, and temporary structures. Indicative service life: Temporary use; exposure and installation affect service life. Typical use: Construction sites, temporary signage, events. |
| Polypropylene (1.6mm) | Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure. Indicative service life: Medium-term use; site conditions apply. Typical use: Warehouses, factories, permanent indoor/outdoor. |
| Colorbond Steel (0.6mm) | Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting. Indicative service life: Long-term substrate; print and site conditions apply. Typical use: Permanent installations, harsh environments. |
| Self-Adhesive Vinyl (Sticker) | Peel-and-stick vinyl for smooth surfaces. Walls, doors, machinery, and equipment labelling. Indicative service life: Short- to medium-term use; surface and exposure affect service life. Typical use: Indoor walls, equipment labels, smooth surfaces. |
Available sizes
- • 225 x 300mm (Small)
- • 300 x 450mm (Medium)
- • 450 x 600mm (Large)
- • 600 x 900mm (Extra Large)
Volume pricing — Polypropylene (1.6mm) · 225 x 300mm (Small) (inc. GST)
| Quantity | Unit price | Saving |
|---|---|---|
| 1 | $20.95 | — |
| 5 | $19.27 | -8% |
| 10 | $17.81 | -15% |
| 25 | $15.92 | -24% |
| 50 | $14.25 | -32% |
| 100+ | $12.57 | -40% |
Prices shown for the listed material/size combination and quantities. Savings increase gradually between these quantities. Full configuration pricing is available at https://www.platinumsigns.com.au/safety-signs/danger/danger-all-leads-must-be-2-5m-above-floor-or-ground-level.
Frequently asked
Why is the 2.5 m height rule important?
It prevents leads and cables from creating trip hazards or electrical contact risks at head height. The sign reinforces this safety rule and protects your liability.
Which material suits a workshop environment?
Polypropylene or Colorbond steel both resist dust, moisture, and minor impacts. Colorbond is tougher in high-traffic areas; polypropylene is lighter and cheaper.
Can I order multiple signs with a bulk discount?
Volume-pricing examples are 5 signs: 8% off, 10 signs: 15% off, 25 signs: 24% off, 50 signs: 32% off, 100 signs: 40% off. Savings increase gradually between these quantities. The total increases as you add more signs, while the average price per sign falls or stays the same. The configurator calculates the total for your selected quantity.
Should I add reflective film to an indoor workshop sign?
Reflective grades provide different visibility performance. Choose the grade required by the project specification and site conditions, and confirm any road, traffic or high-risk requirement with the relevant authority before ordering.
How long does delivery take?
Standard sizes in corflute or polypropylene ship within 2–3 business days. Colorbond and custom work take 5–7 days. Rural areas may add 1–2 days.