Danger Shut Off Machine Before Servicing Sign
Product code: PSS-DAN-051
Machinery servicing demands lockout procedures and clear warnings. This danger sign communicates the critical requirement to shut down and isolate equipment before maintenance, preventing entanglement, crushing, and electrocution injuries. The AS 1319 red header and white 'DANGER' text meet statutory requirements for immediate life-threatening hazards. Platinum Signs supplies corflute, polypropylene, Colorbond, and vinyl in four sizes (225×300 mm to 600×900 mm) to factories, workshops, and service providers. Trade accounts receive volume pricing, reflective coatings, and lamination for high-wear environments.
Material
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $1.90 GST · freight separate
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
- No payment today: we check your order and email a proof with a payment link.
| Quantity | Price per sign | Discount |
|---|---|---|
| 1 | $19.05 ex GST$20.95 inc GST | — |
| 5 | $17.52 ex GST$19.27 inc GST | 8% off |
| 10 | $16.19 ex GST$17.81 inc GST | 15% off |
| 25 | $14.47 ex GST$15.92 inc GST | 24% off |
| 50 | $12.95 ex GST$14.25 inc GST | 32% off |
| 100+ | $11.43 ex GST$12.57 inc GST | 40% off |
Prices shown are for the listed quantities. Savings increase gradually between them; the total always increases as you add more.
View volume pricing
| Quantity | Price per sign | Discount |
|---|---|---|
| 1 | $19.05 ex GST$20.95 inc GST | — |
| 5 | $17.52 ex GST$19.27 inc GST | 8% off |
| 10 | $16.19 ex GST$17.81 inc GST | 15% off |
| 25 | $14.47 ex GST$15.92 inc GST | 24% off |
| 50 | $12.95 ex GST$14.25 inc GST | 32% off |
| 100+ | $11.43 ex GST$12.57 inc GST | 40% off |
Prices shown are for the listed quantities. Savings increase gradually between them; the total always increases as you add more.
Product details
Machinery servicing demands lockout procedures and clear warnings. This danger sign communicates the critical requirement to shut down and isolate equipment before maintenance, preventing entanglement, crushing, and electrocution injuries. The AS 1319 red header and white 'DANGER' text meet statutory requirements for immediate life-threatening hazards. Platinum Signs supplies corflute, polypropylene, Colorbond, and vinyl in four sizes (225×300 mm to 600×900 mm) to factories, workshops, and service providers. Trade accounts receive volume pricing, reflective coatings, and lamination for high-wear environments.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Lightweight corrugated plastic board. Easy to fix to fences, hoarding, and temporary structures.
Indicative durability: Temporary use; exposure and installation affect service life · Typical use: Construction sites, temporary signage, events
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent installations, harsh environments
Peel-and-stick vinyl for smooth surfaces. Walls, doors, machinery, and equipment labelling.
Indicative durability: Short- to medium-term use; surface and exposure affect service life · Typical use: Indoor walls, equipment labels, smooth surfaces
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 225 x 300mm | Up to 5m | Indoor, close range |
| 300 x 450mm | Up to 10m | Standard indoor/outdoor |
| 450 x 600mm | Up to 15m | Outdoor, site entrances |
| 600 x 900mm | Up to 25m | Large sites, high visibility |
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Lamination
Clear protective overlaminate for added UV and scratch resistance. Service life still depends on the print, exposure, cleaning and installation.
Available with vinyl or aluminium only.
Reflective Class 1 (High Intensity)
High-intensity prismatic reflective film. Confirm the grade required by the project specification and relevant authority.
Available with vinyl or aluminium only.
Reflective Class 2 (Engineer Grade)
Engineer-grade reflective film for general site visibility. Confirm suitability for the lighting, approach distance and project specification.
Available with vinyl or aluminium only.
Specifications
| Product code | PSS-DAN-051 |
|---|---|
| Product | Danger Shut Off Machine Before Servicing Sign |
| Category | Danger Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Polypropylene (1.6mm) |
| Selected size | 225 x 300mm (Small) |
| Indicative durability | Medium-term use; site conditions apply |
| Indicative viewing distance | Up to 5m |
| Available sizes | 225 x 300mm (Small), 300 x 450mm (Medium), 450 x 600mm (Large), 600 x 900mm (Extra Large) |
| Available materials | Corflute (5mm), Polypropylene (1.6mm), Colorbond Steel (0.6mm), Self-Adhesive Vinyl (Sticker) |
Selected specifications update with the material and size controls above.
Frequently asked questions
Where exactly should I mount this sign on a machine?
Attach directly to the equipment at access points (panels, covers, doors) at eye level, and on the main power isolation point. Use multiple signs if the machine has several service access areas.
Does this sign replace a lockout-tagout (LOTO) system?
No. This sign reinforces LOTO procedures and safe work method statements. It alerts personnel to the hazard; your LOTO procedure and training ensure compliance and safety.
Is vinyl suitable for machine-mounted signs exposed to oils and coolants?
Yes, vinyl resists oils and chemical splashes. Colorbond is equally robust and more durable long-term. Avoid corflute and standard polypropylene in wet or chemical-heavy machine environments.
Can I order signs with our company logo or additional safety text?
Yes. Custom printing is available on corflute and polypropylene. Supply your artwork or brief, and we'll provide a proof before production. Custom orders typically ship in 10–14 days.
What's the warranty or replacement policy if a sign fades or degrades?
We guarantee legibility for 12 months from delivery under normal conditions. Faded or damaged signs can be reprinted and resupplied at cost. Lamination significantly extends lifespan and is recommended for high-wear areas.
