Platinum Signs
Fire Hydrant & Hose Sign
PSS-FIR-022 · Product data sheet
Data sheet
4 November 2026
https://www.platinumsigns.com.au
Description
This Fire Hydrant & Hose sign combines two critical fire-fighting asset identifiers in one AS 1319–compliant design. The red panel format ensures rapid recognition during emergencies, meeting Australian standards for locations where both hydrants and hose equipment are deployed. Perfect for building entries, equipment rooms, and outdoor fire-fighting zones. Choose from corflute, polypropylene, Colorbond, or vinyl depending on your installation environment and durability requirements. Four sizes available from 225×300 mm to 600×900 mm. All signs include fade-resistant printing; optional additions include pre-drilled holes, lamination, and reflective Class 1 or Class 2 finishes for enhanced visibility. Platinum Signs delivers nationwide with bulk pricing for trade customers managing multiple properties or facilities.
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
- Category
- Fire Signs
- Sign selection
- Confirm against site requirements
- Artwork
- Off-the-shelf design supplied as shown
- Product code
- PSS-FIR-022
Available materials
| Material | Specification |
|---|---|
| Corflute (5mm) | Lightweight corrugated plastic board. Easy to fix to fences, hoarding, and temporary structures. Indicative service life: Temporary use; exposure and installation affect service life. Typical use: Construction sites, temporary signage, events. |
| Polypropylene (1.6mm) | Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure. Indicative service life: Medium-term use; site conditions apply. Typical use: Warehouses, factories, permanent indoor/outdoor. |
| Colorbond Steel (0.6mm) | Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting. Indicative service life: Long-term substrate; print and site conditions apply. Typical use: Permanent installations, harsh environments. |
| Self-Adhesive Vinyl (Sticker) | Peel-and-stick vinyl for smooth surfaces. Walls, doors, machinery, and equipment labelling. Indicative service life: Short- to medium-term use; surface and exposure affect service life. Typical use: Indoor walls, equipment labels, smooth surfaces. |
Available sizes
- • 225 x 300mm (Small)
- • 300 x 450mm (Medium)
- • 450 x 600mm (Large)
- • 600 x 900mm (Extra Large)
Volume pricing — Polypropylene (1.6mm) · 225 x 300mm (Small) (inc. GST)
| Quantity | Unit price | Saving |
|---|---|---|
| 1 | $20.95 | — |
| 5 | $19.27 | -8% |
| 10 | $17.81 | -15% |
| 25 | $15.92 | -24% |
| 50 | $14.25 | -32% |
| 100+ | $12.57 | -40% |
Prices shown for the listed material/size combination and quantities. Savings increase gradually between these quantities. Full configuration pricing is available at https://www.platinumsigns.com.au/safety-signs/fire/fire-hydrant-hose.
Frequently asked
When should I use the Fire Hydrant & Hose sign versus single-asset signs?
Use this combined sign where both hydrant and hose equipment are stored or located in close proximity, reducing clutter and installation points while clearly marking both assets.
Is lamination recommended for this sign?
Lamination adds durability and protects against moisture, UV fade, and minor physical wear. It's recommended for high-traffic areas, outdoor installations, or facilities with frequent cleaning cycles.
What's the difference between Class 1 and Class 2 reflective finishes?
Reflective grades provide different visibility performance. Choose the grade required by the project specification and site conditions, and confirm any road, traffic or high-risk requirement with the relevant authority before ordering.
Can I customise the text or layout?
Standard designs follow AS 1319 specifications. Custom artwork or text modifications are available for bulk orders; contact our team to discuss your requirements and lead times.
What's included with pre-drilled holes?
Yes. Four-corner pre-drilled holes are an optional extra with a base surcharge of $3.00 inc GST per sign for the listed configurations, before any applicable volume discount. Select the option to update the configured total before adding to cart.