Platinum Signs
Fire Hydrant Sign – Equipment Location
PS-FIR021 · Product data sheet
Data sheet
20 September 2026
https://www.platinumsigns.com.au
Description
Use this Fire Hydrant sign to identify the location of an installed hydrant in a workplace, commercial building, industrial facility, car park, shared site or other managed property. The verified landscape artwork has a red field, white border and the exact two-line legend FIRE HYDRANT. It contains no pictogram and no directional arrow, so it marks the equipment location rather than implying a route. Choose the material and size for the mounting surface, exposure and normal approach. This product is the printed sign only; it does not include, install, inspect, maintain or certify a hydrant system.
This printed sign identifies a fire hydrant location. Confirm the site-specific equipment, placement and applicable requirements before ordering.
- Category
- Fire Signs
- Sign selection
- Identifies a fire hydrant location; the artwork contains no directional arrow.
- Artwork
- Off-the-shelf design supplied as shown
- Product code
- PS-FIR021
Available materials
| Material | Specification |
|---|---|
| Polypropylene (1.6mm) | Rigid polypropylene panel for routine indoor and general site use. Use suitable fixings for the mounting surface; optional holes are available. |
| Self-Adhesive Vinyl (Sticker) | Self-adhesive vinyl for a clean, dry, smooth compatible surface. Prepare the surface before application; mounting holes do not apply. |
| Corflute (3mm) | Lightweight Corflute panel for temporary placement. Support and secure the panel against movement; optional holes are available. |
| Colorbond Steel (0.6mm) | Rigid Colorbond steel face for mechanical fixing. Use compatible fixings and a firm mounting surface; optional holes are available. |
Available sizes
- • 300 x 225mm — Polypropylene (1.6mm) / Self-Adhesive Vinyl (Sticker) / Corflute (3mm) / Colorbond Steel (0.6mm)
- • 450 x 300mm — Polypropylene (1.6mm) / Self-Adhesive Vinyl (Sticker) / Corflute (3mm) / Colorbond Steel (0.6mm)
- • 600 x 450mm — Polypropylene (1.6mm) / Self-Adhesive Vinyl (Sticker) / Corflute (3mm) / Colorbond Steel (0.6mm)
Volume pricing — Polypropylene (1.6mm) · 300x225 (inc. GST)
| Quantity | Unit price | Saving |
|---|---|---|
| 1 | $26.95 | — |
| 5 | $24.79 | -8% |
| 10 | $22.91 | -15% |
| 25 | $20.48 | -24% |
| 50 | $18.33 | -32% |
| 100+ | $16.17 | -40% |
Prices shown for the listed material/size combination and quantities. Savings increase gradually between these quantities. Full configuration pricing is available at https://www.platinumsigns.com.au/safety-signs/fire/fire-hydrant-sign.
Frequently asked
What is printed on this Fire Hydrant sign?
The approved landscape artwork has a red field, a white border and the exact two-line legend FIRE HYDRANT. It contains no pictogram and no directional arrow.
Does the sign include a hydrant or fire-safety service?
No. This product is the printed location sign only. It does not include a hydrant, booster, valves, pipework, installation, inspection, maintenance, certification or fire-safety service.
Where should the Fire Hydrant sign be installed?
Install it at, above or immediately beside the hydrant it identifies, where the complete face can be seen on the normal approach. Confirm the position against the site's fire-safety documentation.
Can this sign direct people to a hydrant around a corner?
Not by itself. The approved artwork has no arrow. Use a separately verified directional sign at genuine decision points when the hydrant cannot be seen from the approach.
Which material and size should I choose?
Polypropylene is the default rigid option. Vinyl suits a clean smooth surface, Corflute suits temporary placement, and Colorbond steel provides a stronger mechanically fixed face. The selector shows three landscape sizes.
What volume discounts apply?
Any quantity pricing available for the selected variant is shown on the product page before it is added to the basket.