Platinum Signs
Do Not Walk or Stand on Conveyor Sign
PSS-PRO-004 · Product data sheet
Data sheet
5 November 2026
https://www.platinumsigns.com.au
Description
Conveyor and machinery hazards demand explicit warning. This prohibition sign displays the AS 1319–mandated red circle-and-slash symbol, clearly forbidding personnel from walking or standing on moving equipment. Engineered on Australian-made substrates—corflute, polypropylene, Colorbond, vinyl—sized from 225×300 mm to 600×900 mm for warehouse, manufacturing, and logistics environments. Lamination and reflective upgrades (Class 1/2) enhance durability and visibility in high-traffic or low-light zones. Platinum Signs supplies trade accounts with volume discounts, fast turnaround, and Australia-wide delivery to keep your site compliant and safe.
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
- Category
- Prohibition Signs
- Sign selection
- Confirm against site requirements
- Artwork
- Off-the-shelf design supplied as shown
- Product code
- PSS-PRO-004
Available materials
| Material | Specification |
|---|---|
| Corflute (5mm) | Lightweight corrugated plastic board. Easy to fix to fences, hoarding, and temporary structures. Indicative service life: Temporary use; exposure and installation affect service life. Typical use: Construction sites, temporary signage, events. |
| Polypropylene (1.6mm) | Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure. Indicative service life: Medium-term use; site conditions apply. Typical use: Warehouses, factories, permanent indoor/outdoor. |
| Colorbond Steel (0.6mm) | Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting. Indicative service life: Long-term substrate; print and site conditions apply. Typical use: Permanent installations, harsh environments. |
| Self-Adhesive Vinyl (Sticker) | Peel-and-stick vinyl for smooth surfaces. Walls, doors, machinery, and equipment labelling. Indicative service life: Short- to medium-term use; surface and exposure affect service life. Typical use: Indoor walls, equipment labels, smooth surfaces. |
Available sizes
- • 225 x 300mm (Small)
- • 300 x 450mm (Medium)
- • 450 x 600mm (Large)
- • 600 x 900mm (Extra Large)
Volume pricing — Polypropylene (1.6mm) · 225 x 300mm (Small) (inc. GST)
| Quantity | Unit price | Saving |
|---|---|---|
| 1 | $20.95 | — |
| 5 | $19.27 | -8% |
| 10 | $17.81 | -15% |
| 25 | $15.92 | -24% |
| 50 | $14.25 | -32% |
| 100+ | $12.57 | -40% |
Prices shown for the listed material/size combination and quantities. Savings increase gradually between these quantities. Full configuration pricing is available at https://www.platinumsigns.com.au/safety-signs/prohibition/do-not-walk-or-stand-on-conveyor.
Frequently asked
Where exactly should this sign be mounted on a conveyor system?
Install at both the entry and exit points of the conveyor run, at eye level (1.4–1.7 m), and ensure nothing obstructs the view from operator positions or nearby walkways.
Is lamination worth the extra cost for a factory floor?
Yes. Lamination protects against oil splashes, moisture, and abrasion from handling, extending sign life by 2–3 years in industrial settings.
What's the best material for a high-temperature production area?
Colorbond or vinyl handle heat and humidity better than corflute; polypropylene sits in the middle. Avoid corflute near heat sources above 60°C.
Do you supply matching mandatory signs (e.g., 'Authorised Personnel Only')?
The appropriate safety-sign category, wording, placement and supporting controls depend on the product purpose, site risk and applicable jurisdiction. Confirm the requirement with your WHS adviser or regulator; a sign alone does not discharge WHS duties.
How many signs do I need for a long conveyor line?
Minimum: entry and exit points. For lines over 20 m, add intermediate signs every 8–10 m or at junctions where personnel access the belt.