Platinum Signs
No Smoking Or Vaping Sign
PS-PRO090 · Product data sheet
Data sheet
16 September 2026
https://www.platinumsigns.com.au
Description
This No Smoking Or Vaping sign covers both habits on a single panel. A red prohibition circle and bar crosses a lit cigarette on the left and an e-cigarette on the right, with the NO SMOKING OR VAPING legend set in two lines of black capitals underneath. The red-on-white prohibition layout follows the AS 1319 convention for signs that forbid an action. Platinum Signs produces this sign in two portrait formats, 225 × 300 mm and 450 × 600 mm. Choose rigid polypropylene or colorbond steel for entrances, loading docks and carparks, corflute for temporary sites and events, or self-adhesive vinyl for glass doors and indoor walls. Place the sign where people enter the smoke-free area so the message is read before anyone lights a cigarette or draws on a vape. At order time you can add drilled corner holes to polypropylene, colorbond or corflute, or gloss lamination to the vinyl decal. The sign communicates a site rule; enforcing smoke-free areas remains the responsibility of the occupier.
The red circle-and-bar pictograms on a white panel follow the AS 1319 prohibition sign convention; the sign states a site rule and is not a regulatory certification.
- Category
- Prohibition Signs
- Sign selection
- Prohibits both cigarette smoking and the use of e-cigarettes or vapes in the signed area.
- Artwork
- Off-the-shelf design supplied as shown
- Product code
- PS-PRO090
Available materials
| Material | Specification |
|---|---|
| Polypropylene (1.6mm) | Rigid 1.6 mm polypropylene panel printed on one face for entrances, lobbies and covered work areas. Screw through the corners or fix with double-sided tape to a flat wall or door. |
| Colorbond Steel (0.6mm) | Pre-painted steel panel printed on the coated face for long-term exterior use. Screw to a wall, post or fence; add drill holes when you order. |
| Corflute (3mm) | Lightweight corrugated plastic board for temporary or event use. Cable-tie through drilled holes or tape to a smooth surface. |
| Self-Adhesive Vinyl (Sticker) | Self-adhesive vinyl decal for glass, doors and smooth painted surfaces. Clean and dry the surface, then apply from one edge to avoid trapped air. |
Available sizes
- • 225 x 300mm (Small) — Polypropylene (1.6mm) / Colorbond Steel (0.6mm) / Corflute (3mm) / Self-Adhesive Vinyl (Sticker)
- • 450 x 600mm (Large) — Polypropylene (1.6mm) / Colorbond Steel (0.6mm) / Corflute (3mm) / Self-Adhesive Vinyl (Sticker)
Volume pricing — Polypropylene (1.6mm) · 225 x 300mm (Small) (inc. GST)
| Quantity | Unit price | Saving |
|---|---|---|
| 1 | $26.95 | — |
| 5 | $24.79 | -8% |
| 10 | $22.91 | -15% |
| 25 | $20.48 | -24% |
| 50 | $18.33 | -32% |
| 100+ | $16.17 | -40% |
Prices shown for the listed material/size combination and quantities. Savings increase gradually between these quantities. Full configuration pricing is available at https://www.platinumsigns.com.au/safety-signs/prohibition/no-smoking-or-vaping-sign.
Frequently asked
What does the sign show?
A lit cigarette and an e-cigarette, each inside a red prohibition circle with a diagonal bar, above the NO SMOKING OR VAPING legend in black capitals.
Why not use a plain no smoking sign?
A plain no smoking sign does not picture a vape. This sign shows both, so the rule is clear to people using e-cigarettes.
Which sizes are available?
225 × 300 mm and 450 × 600 mm portrait, both matching the 3:4 master artwork.
Which material suits an outdoor entrance?
Colorbond steel or rigid polypropylene; corflute is intended for temporary use and vinyl for glass or smooth indoor surfaces.
Can I get fixing holes?
Yes. Add the drill holes option when ordering polypropylene, colorbond or corflute and the corners are drilled before dispatch.