Platinum Signs
No Vaping Sign
PS-PRO089 · Product data sheet
Data sheet
16 September 2026
https://www.platinumsigns.com.au
Description
Vaping is easy to miss in a room and hard to police without a sign that names it. This No Vaping sign shows an e-cigarette with rising vapour inside the red circle-and-bar prohibition symbol, with NO VAPING printed beneath in large black capitals, so the rule is understood at a glance from across a reception or corridor. The sign is offered as a 225 mm by 300 mm portrait panel for doors, windows and lift lobbies, and as a 450 mm by 600 mm panel for gates, fences and vehicle yards. Both sizes share the same 3:4 master artwork, so the pictogram and legend scale without redrawing. Choose polypropylene or colorbond for a rigid panel, corflute for a temporary board, or a vinyl decal for glass and painted walls. Drilled corner holes can be added to the three rigid materials, and the vinyl decal can be gloss laminated for wipe-down cleaning.
The layout uses the AS 1319 prohibition convention of a red annulus and diagonal bar over a black pictogram on white. Platinum Signs supplies the sign as printed artwork and does not certify compliance for any specific site.
- Category
- Prohibition Signs
- Sign selection
- Prohibits e-cigarettes and vaping devices in the marked area; it does not picture a lit cigarette, so pair it with a No Smoking sign where tobacco must also be excluded.
- Artwork
- Off-the-shelf design supplied as shown
- Product code
- PS-PRO089
Available materials
| Material | Specification |
|---|---|
| Polypropylene (1.6mm) | Rigid printed polypropylene panel, 1.6 mm thick, suited to reception walls, corridors and covered entrances. Fasten through drilled corner holes or bond to a flat surface with double-sided tape. |
| Colorbond Steel (0.6mm) | Printed pre-painted steel panel for fences, gates, carparks and other exposed outdoor positions. Screw or rivet to a post, wall or fence, ordering drilled holes with the sign. |
| Corflute (3mm) | Light corrugated plastic board intended for short-term, event or site-office use. Tape to a smooth surface or cable-tie through drilled holes on mesh fencing. |
| Self-Adhesive Vinyl (Sticker) | Self-adhesive vinyl decal for glass doors, windows, lift lobbies and smooth painted walls; gloss lamination is available at order time. Wipe the surface clean, peel the backing and squeegee from one side to the other. |
Available sizes
- • 225 x 300mm (Small) — Polypropylene (1.6mm) / Colorbond Steel (0.6mm) / Corflute (3mm) / Self-Adhesive Vinyl (Sticker)
- • 450 x 600mm (Large) — Polypropylene (1.6mm) / Colorbond Steel (0.6mm) / Corflute (3mm) / Self-Adhesive Vinyl (Sticker)
Volume pricing — Polypropylene (1.6mm) · 225 x 300mm (Small) (inc. GST)
| Quantity | Unit price | Saving |
|---|---|---|
| 1 | $26.95 | — |
| 5 | $24.79 | -8% |
| 10 | $22.91 | -15% |
| 25 | $20.48 | -24% |
| 50 | $18.33 | -32% |
| 100+ | $16.17 | -40% |
Prices shown for the listed material/size combination and quantities. Savings increase gradually between these quantities. Full configuration pricing is available at https://www.platinumsigns.com.au/safety-signs/prohibition/no-vaping-sign.
Frequently asked
Does this sign also ban cigarettes?
No. The pictogram is an e-cigarette only. Where tobacco smoking must also be excluded, add a No Smoking sign or choose a combined No Smoking Or Vaping sign.
Which size should I order?
225 × 300 mm suits doors, windows and reception walls. 450 × 600 mm suits gates, fences, carparks and loading areas.
Can it go on a glass door?
Yes. Order the vinyl decal, which is self-adhesive and can be gloss laminated for regular cleaning.
Which materials can have drilled holes?
Polypropylene, colorbond and corflute can be ordered with drilled corner holes. The vinyl decal is adhesive and has no holes option.
Is the sign suitable outdoors?
Colorbond steel and polypropylene are made for outdoor mounting. Corflute is intended for temporary use and vinyl for smooth interior or sheltered surfaces.