Do Not Hang on Ring Sign
Product code: PSS-WH-GEN-0050
Prevent damage to lifting equipment and ensure workplace safety with a Do Not Hang on Ring sign that meets AS 1319 standards. Ideal for warehouses, distribution centres, manufacturing plants, and any facility using hoists, cranes, or rigging equipment where improper use of lifting rings poses a hazard.
Material
Lightweight corrugated plastic board. Easy to fix to fences, hoarding, and temporary structures.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
This configuration is temporarily unavailable. Choose another material or size, or contact us for help.
Open printable data sheet in a new tabProduct details
Prevent damage to lifting equipment and ensure workplace safety with a Do Not Hang on Ring sign that meets AS 1319 standards. Ideal for warehouses, distribution centres, manufacturing plants, and any facility using hoists, cranes, or rigging equipment where improper use of lifting rings poses a hazard.
Available in corflute, polypropylene, colorbond, and vinyl in sizes from 225×300 mm to 600×900 mm. Enhance visibility with mounting holes, lamination, or reflective finishes (Class 1 or 2). Trade accounts enjoy volume pricing, flexible payment terms, and Australia-wide delivery on all orders.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|
Specifications
| Product code | PSS-WH-GEN-0050 |
|---|---|
| Product | Do Not Hang on Ring Sign |
| Category | Site Management Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Corflute (5mm) |
| Selected size | 225 x 300,300mm |
| Indicative durability | Temporary use; exposure and installation affect service life |
| Indicative viewing distance | Confirm for the site |
| Available sizes | |
| Available materials |
Selected specifications update with the material and size controls above.
Frequently asked questions
Where should I install this sign on lifting equipment?
Position it near hoists, cranes, and rigging points where operators can see it clearly before use. High-traffic loading bays and equipment storage areas are common placement zones.
Which material is best for a humid warehouse?
Colorbond or polypropylene resist moisture and humidity. Colorbond is more durable in extreme conditions; polypropylene offers good performance at a lower cost.
Do I need reflective finishes in a well-lit factory?
Reflective grades provide different visibility performance. Choose the grade required by the project specification and site conditions, and confirm any road, traffic or high-risk requirement with the relevant authority before ordering.
Can I order a mix of sizes for different equipment?
Absolutely. Specify the size needed for each location, and we'll consolidate your order with bulk pricing applied across all items.
What installation support do you provide?
We supply mounting holes and lamination to simplify fitting. For large rollouts across multiple sites, our team can advise on optimal placement and provide installation guidance.
