Platinum Signs
Danger Flammable Gas No Smoking • Sparks Flames Sign
PSS-WH-DAN-0024 · Product data sheet
Data sheet
4 November 2026
https://www.platinumsigns.com.au
Description
This dual-hazard danger sign addresses flammable gas and the risks of smoking, sparks, or open flame in a single, compliant format. The red header with white 'DANGER' text conforms to AS 1319 for life-threatening conditions. Deploy at LPG storage facilities, fuel depots, paint spray booths, and any area where flammable vapours may accumulate. Supplied in corflute, Colorbond, or polypropylene, sized from 300×225 mm to 600×450 mm. Reflective Class 1 and Class 2 options enhance night-time visibility; lamination protects against moisture and UV degradation. Trade and bulk pricing available. Nationwide delivery within 5 working days.
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
- Category
- Statutory Signs
- Sign selection
- Confirm against site requirements
- Artwork
- Off-the-shelf design supplied as shown
- Product code
- PSS-WH-DAN-0024
Available materials
| Material | Specification |
|---|---|
| Corflute (5mm) | Lightweight corrugated plastic board. Easy to fix to fences, hoarding, and temporary structures. Indicative service life: Temporary use; exposure and installation affect service life. Typical use: Construction sites, temporary signage, events. |
| Colorbond Steel (0.6mm) | Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting. Indicative service life: Long-term substrate; print and site conditions apply. Typical use: Permanent installations, harsh environments. |
| Polypropylene (1.6mm) | Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure. Indicative service life: Medium-term use; site conditions apply. Typical use: Warehouses, factories, permanent indoor/outdoor. |
Available sizes
- • 300 x 225mm
- • 450 x 300mm
- • 600 x 450mm
Volume pricing — Polypropylene (1.6mm) · 300x225 (inc. GST)
| Quantity | Unit price | Saving |
|---|---|---|
| 1 | $20.95 | — |
| 5 | $19.27 | -8% |
| 10 | $17.81 | -15% |
| 25 | $15.92 | -24% |
| 50 | $14.25 | -32% |
| 100+ | $12.57 | -40% |
Prices shown for the listed material/size combination and quantities. Savings increase gradually between these quantities. Full configuration pricing is available at https://www.platinumsigns.com.au/safety-signs/statutory/danger-flammable-gas-no-smoking-sparks-flames.
Frequently asked
Should I use this sign indoors or outdoors?
Both. Corflute suits indoor or sheltered outdoor areas; Colorbond is ideal for exposed outdoor storage or fuel handling zones; polypropylene works in general indoor/outdoor applications.
How many signs do I need for a large storage facility?
Place signs at every entry point to the hazard zone at approximately 1.5 m height. For large facilities, consider one sign per 10–15 metres of perimeter or at each access route.
What does the dual hazard format communicate?
It clearly indicates both the presence of flammable gas and the prohibition on smoking, sparks, and open flames, reducing ambiguity and reinforcing the seriousness of the combined risk.
Is lamination worth the extra cost?
Yes, if the sign will be exposed to moisture, cleaning chemicals, or direct sunlight. Lamination extends the lifespan by 2–3 years and maintains colour vibrancy.
Do you offer emergency or rush orders?
Yes. Contact us directly for urgent requirements; we can often expedite standard sizes within 2–3 working days for an additional charge.