Platinum Signs
Danger Risk of Battery Explosion No Smoking I Sparks Flames Sign
PSS-WH-DAN-0049 · Product data sheet
Data sheet
4 November 2026
https://www.platinumsigns.com.au
Description
Battery rooms and charging areas demand clear hazard communication. This danger sign alerts workers to the risk of explosive gas release during charging or fault conditions. The AS 1319 red header and white 'DANGER' text ensure immediate recognition of a life-threatening hazard. Supplied in corflute, Colorbond, and polypropylene, sized 300×225 mm to 600×450 mm. Platinum Signs delivers Australia-wide to factories, warehouses, and service centres. Trade accounts access volume discounts, reflective upgrades, and lamination for extended durability.
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
- Category
- Statutory Signs
- Sign selection
- Confirm against site requirements
- Artwork
- Off-the-shelf design supplied as shown
- Product code
- PSS-WH-DAN-0049
Available materials
| Material | Specification |
|---|---|
| Corflute (5mm) | Lightweight corrugated plastic board. Easy to fix to fences, hoarding, and temporary structures. Indicative service life: Temporary use; exposure and installation affect service life. Typical use: Construction sites, temporary signage, events. |
| Colorbond Steel (0.6mm) | Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting. Indicative service life: Long-term substrate; print and site conditions apply. Typical use: Permanent installations, harsh environments. |
| Polypropylene (1.6mm) | Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure. Indicative service life: Medium-term use; site conditions apply. Typical use: Warehouses, factories, permanent indoor/outdoor. |
Available sizes
- • 300 x 225mm
- • 450 x 300mm
- • 600 x 450mm
Volume pricing — Polypropylene (1.6mm) · 300x225 (inc. GST)
| Quantity | Unit price | Saving |
|---|---|---|
| 1 | $20.95 | — |
| 5 | $19.27 | -8% |
| 10 | $17.81 | -15% |
| 25 | $15.92 | -24% |
| 50 | $14.25 | -32% |
| 100+ | $12.57 | -40% |
Prices shown for the listed material/size combination and quantities. Savings increase gradually between these quantities. Full configuration pricing is available at https://www.platinumsigns.com.au/safety-signs/statutory/danger-risk-of-battery-explosion-no-smoking-i-sparks-flames.
Frequently asked
Where should I position this sign in a battery charging room?
Mount at eye level (1.5 m) at every entrance to the charging area, and adjacent to battery banks or charger units. AS 1319 requires signs to be visible before personnel enter the hazard zone.
What causes battery explosion, and why is this sign critical?
Lead-acid and lithium batteries release hydrogen and oxygen gases during charging. Sparks, flames, or hot surfaces can ignite these gases, causing violent explosions. This sign prevents ignition sources and saves lives.
Is lamination worth the extra cost?
Yes, especially in damp or chemical-heavy environments. Lamination protects against moisture, spillage, and UV degradation, extending sign life by 50% or more and maintaining legibility.
Can I order custom text or add facility-specific warnings?
We offer custom printing on corflute and polypropylene. Contact our team with your specifications; custom runs typically ship within 10 business days.
What's the typical lifespan of these signs?
Corflute lasts 2–3 years indoors; Colorbond 5–7 years outdoors; polypropylene 3–5 years in mixed conditions. Lamination and reflective coatings add durability. Replace when text fades below legibility.