Entry Sign
Product code: SS-TRF-115
Control access to restricted areas with a durable Entry sign built to AS 1319 standards. Available in aluminium, polypropylene, or Colorbond steel, with three practical sizes: 450×300 mm, 450×600 mm, and 600×400 mm. Add pre-drilled holes for quick installation and Class 2 reflective sheeting for visibility in low light. Suited to factories, warehouses, car parks, and construction sites. Platinum Signs delivers nationwide with flexible payment options for trade customers and organisations managing multiple locations.
Material
Rigid aluminium sheet suited to long-term signage where corrosion resistance and dimensional stability matter.
Use the size in the approved traffic-control plan or road-authority specification.
Includes $4.55 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $50.00 | — |
| 5-9 | $46.00 | 8% off |
| 10-24 | $42.50 | 15% off |
| 25-49 | $38.00 | 24% off |
| 50-99 | $34.00 | 32% off |
| 100+ | $30.00 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $50.00 | — |
| 5-9 | $46.00 | 8% off |
| 10-24 | $42.50 | 15% off |
| 25-49 | $38.00 | 24% off |
| 50-99 | $34.00 | 32% off |
| 100+ | $30.00 | 40% off |
Product details
Control access to restricted areas with a durable Entry sign built to AS 1319 standards. Available in aluminium, polypropylene, or Colorbond steel, with three practical sizes: 450×300 mm, 450×600 mm, and 600×400 mm. Add pre-drilled holes for quick installation and Class 2 reflective sheeting for visibility in low light. Suited to factories, warehouses, car parks, and construction sites. Platinum Signs delivers nationwide with flexible payment options for trade customers and organisations managing multiple locations.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Rigid aluminium sheet suited to long-term signage where corrosion resistance and dimensional stability matter.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent outdoor installations and high-durability sites
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent installations, harsh environments
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 450 x 600mm | Up to 15m | Outdoor, site entrances |
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Reflective Class 2 (Engineer Grade)
Engineer-grade reflective film for general site visibility. Confirm suitability for the lighting, approach distance and project specification.
Available with vinyl or aluminium only.
Specifications
| Product code | SS-TRF-115 |
|---|---|
| Product | Entry Sign |
| Category | Traffic & Road Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Aluminium (1.6mm) |
| Selected size | 450 x 300mm |
| Indicative durability | Long-term substrate; print and site conditions apply |
| Indicative viewing distance | Confirm for the site |
| Available sizes | 450 x 300mm, 450 x 600mm (Large), 600 x 400mm |
| Available materials | Aluminium (1.6mm), Polypropylene (1.6mm), Colorbond Steel (0.6mm) |
Selected specifications update with the material and size controls above.
Frequently asked questions
Which material is best for outdoor vs. indoor use?
Aluminium and Colorbond suit outdoor exposure; polypropylene is lighter and cost-effective for indoor or covered areas. All meet AS 1319.
Do the pre-drilled holes fit standard fasteners?
Yes. Four-corner pre-drilled holes are an optional extra with a base surcharge of $3.00 inc GST per sign for the listed configurations, before any applicable volume discount. Select the option to update the configured total before adding to cart.
What is Class 2 reflective sheeting?
Reflective grades provide different visibility performance. Choose the grade required by the project specification and site conditions, and confirm any road, traffic or high-risk requirement with the relevant authority before ordering.
Can I customise the text or design?
Custom designs are available on bulk orders. Contact our team with your artwork or brief, and we'll provide a quote and proof.
What warranty do you offer?
Signs are covered against manufacturing defects for 12 months. Reflective sheeting degradation due to weathering is not covered.
