Left Lane Must Exit Sign
Product code: SS-TRF-037
Enforce mandatory left-lane exits with this unambiguous traffic control sign. Made from robust aluminium with Class 1 reflective sheeting, it provides clear instruction in all weather and lighting conditions, fully compliant with AS 1319 standards.
Material specification
This product is supplied only in Aluminium (1.6mm); choose the approved size below.
Use the size in the approved traffic-control plan or road-authority specification.
Includes $8.64 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $95.00 | — |
| 5-9 | $87.40 | 8% off |
| 10-24 | $80.75 | 15% off |
| 25-49 | $72.20 | 24% off |
| 50-99 | $64.60 | 32% off |
| 100+ | $57.00 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $95.00 | — |
| 5-9 | $87.40 | 8% off |
| 10-24 | $80.75 | 15% off |
| 25-49 | $72.20 | 24% off |
| 50-99 | $64.60 | 32% off |
| 100+ | $57.00 | 40% off |
Product details
Enforce mandatory left-lane exits with this unambiguous traffic control sign. Made from robust aluminium with Class 1 reflective sheeting, it provides clear instruction in all weather and lighting conditions, fully compliant with AS 1319 standards.
Offered in 450×600 mm and 600×800 mm sizes to suit different road environments—use the smaller format on local roads and the larger on high-speed routes requiring extended sightlines. Platinum Signs delivers across Australia and provides bulk pricing for highway authorities, contractors, and fleet operators managing traffic flows.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Rigid aluminium sheet suited to long-term signage where corrosion resistance and dimensional stability matter.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent outdoor installations and high-durability sites
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 450 x 600mm | Up to 15m | Outdoor, site entrances |
Optional finishes
Reflective Class 1 (High Intensity)
High-intensity prismatic reflective film. Confirm the grade required by the project specification and relevant authority.
Available with vinyl or aluminium only.
Specifications
| Product code | SS-TRF-037 |
|---|---|
| Product | Left Lane Must Exit Sign |
| Category | Traffic & Road Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Aluminium (1.6mm) |
| Selected size | 450 x 600mm (Large) |
| Indicative durability | Long-term substrate; print and site conditions apply |
| Indicative viewing distance | Up to 15m |
| Available sizes | 450 x 600mm (Large), 600 x 800mm |
| Available materials | Aluminium (1.6mm) |
Selected specifications update with the material and size controls above.
Frequently asked questions
Is this sign compliant with Australian road regulations?
Yes, it meets AS 1319 specifications and is recognised by all Australian transport authorities as a mandatory traffic instruction.
What's the typical installation distance before an exit?
Position the sign 100–200 m before the exit on high-speed roads, or 30–50 m on local streets, to give drivers adequate reaction time.
Does the reflective material fade over time?
Reflective grades provide different visibility performance. Choose the grade required by the project specification and site conditions, and confirm any road, traffic or high-risk requirement with the relevant authority before ordering.
Can this sign be used on motorways and freeways?
Yes, it's suitable for all road types where mandatory lane exits are designated; check local road authority guidelines for specific placement rules.
What mounting options do you recommend?
We supply the sign panel only; galvanised steel or stainless steel posts and brackets are recommended for durability in Australian conditions.
