Low Clearance Sign – DANGER Header, 600 × 450 Aluminium
Product code: PS-TRF294
Mark a confirmed low-overhead hazard with the exact DANGER / LOW CLEARANCE face shown. This generic aluminium marker contains no numeric height, so verify the measured clearance, vehicle route and complete site controls separately.
Material specification
This product is supplied only in Aluminium (1.6mm); choose the approved size below.
Use the size in the approved traffic-control plan or road-authority specification.
Includes $8.64 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $95.00 | — |
| 5-9 | $87.40 | 8% off |
| 10-24 | $80.75 | 15% off |
| 25-49 | $72.20 | 24% off |
| 50-99 | $64.60 | 32% off |
| 100+ | $57.00 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $95.00 | — |
| 5-9 | $87.40 | 8% off |
| 10-24 | $80.75 | 15% off |
| 25-49 | $72.20 | 24% off |
| 50-99 | $64.60 | 32% off |
| 100+ | $57.00 | 40% off |
Product details
Match the exact DANGER / LOW CLEARANCE face
The approved artwork shows a red-and-white DANGER oval above the black two-line legend LOW CLEARANCE. It has no arrow, pictogram, number or metre value. Use it only where that generic no-height message is the confirmed requirement.
Keep the missing height value explicit
This face cannot tell a driver whether a vehicle and its load will fit. Obtain the actual minimum clearance through the approved site or project process, keep the measurement current when conditions change, and specify any numeric-height sign separately.
Use the sign within a traffic-management plan
Consider vehicle and load heights, overhead structures, approach visibility, lighting, stopping and turning space, an alternative route and physical controls. A warning face can support those decisions, but it is not a substitute for measuring the hazard or controlling the route.
Specify a current road sign separately
For NSW public-road use, the current register lists an R6-16 face with a numeric height. Confirm the registered design, measured clearance, reflective construction, placement, support and installation authority in the approved project documents rather than substituting this generic artwork.
Check the sign format before ordering
This generic face contains no indicated height and is not represented as the current NSW R6-16 Low Clearance sign. It cannot establish whether a vehicle and its load will fit or replace measurement, route controls, a traffic-management plan or installation authority.
- Transport for NSW – R6-16 Low Clearance (_ . _) m — The current Traffic Signs Register lists R6-16 as a Low Clearance sign with a numeric height in metres, unlike this generic DANGER / LOW CLEARANCE artwork. Read source (opens in a new tab)The register listing does not certify this product or approve it as a substitute for the current numeric-height face.
- NSW Road Rules 2014 – Rule 102 — Rule 102 says a driver must not pass a clearance or low-clearance sign when the vehicle is higher than the height indicated by the sign, and states that vehicle includes any load carried. Read source (opens in a new tab)This product has no indicated height, so the rule must not be used to imply that the face tells a driver whether the vehicle will fit.
- Safe Work Australia – Traffic management: managing risks — The guidance says traffic-risk assessment should consider overhead structures, vehicle types and heights, entry and exit routes, visibility and the wider layout. A traffic-management plan may include vehicle flow, barriers, walkways and signs. Read source (opens in a new tab)Safe Work Australia develops national policy and is not a WHS regulator. Apply the relevant jurisdictional duties and site assessment.
Before ordering
- Confirm that the exact DANGER / LOW CLEARANCE artwork with no numeric height matches the approved site message.
- Obtain and verify the actual minimum clearance through the competent site or project assessment process.
- Check the height of every relevant vehicle and load, the approach and a safe alternative or turnaround route.
- Confirm reflectivity, lighting, position, support, holes, brackets, height bars and other physical controls separately.
- Use the current registered numeric-height design and approved project authority for any regulated public-road installation.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Product guidance reviewed by Platinum Signs product and editorial team. Last reviewed: .
Material options
Rigid aluminium sheet suited to long-term signage where corrosion resistance and dimensional stability matter.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent outdoor installations and high-durability sites
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 450 x 600mm | Up to 15m | Outdoor, site entrances |
Optional finishes
Reflective Class 1 (High Intensity)
High-intensity prismatic reflective film. Confirm the grade required by the project specification and relevant authority.
Available with vinyl or aluminium only.
Specifications
| Product code | PS-TRF294 |
|---|---|
| Selected SKU | PS-TRF294-600X450-AL16 |
| Product | Low Clearance Sign – DANGER Header, 600 × 450 Aluminium |
| Category | Traffic & Road Signs |
| Format guidance | Landscape white face with black border, red-and-black DANGER header and black LOW CLEARANCE legend; no numeric height or metre value |
| Printing | UV direct print |
| Selected material | Aluminium (1.6mm) |
| Selected size | 600 x 450mm (Large) |
| Indicative durability | Long-term substrate; print and site conditions apply |
| Indicative viewing distance | Up to 15m |
| Available sizes | 600 x 450mm (Large) |
| Available materials | Aluminium (1.6mm) |
Selected specifications update with the material and size controls above.
Frequently asked questions
What is printed on this Low Clearance sign?
The approved landscape artwork has a black header with a red-and-white DANGER oval above the exact black two-line legend LOW CLEARANCE. It has no pictogram, arrow, number, decimal point, metre unit or stated clearance height.
Does this sign tell a driver the maximum vehicle height?
No. The face contains no numeric height, so a driver cannot use it to decide whether a vehicle and its load will fit beneath an overhead structure. Establish the actual minimum clearance through the approved site or project process, then provide the required measured-height sign and route controls separately.
Is this the current NSW R6-16 Low Clearance sign?
No. The Transport for NSW register lists R6-16 as Low Clearance (_ . _) m, with a height value. This generic DANGER / LOW CLEARANCE face is not represented as R6-16 or as a current public-road sign, and no installation approval is claimed. Public-road work must use the current registered design and approved project documents.
What should be checked around a low-clearance route?
Confirm the overhead structure, actual minimum clearance, vehicle and load heights, approach visibility, lighting, stopping and turning space, an alternative or turnaround route, and the complete traffic-management arrangement. Safe Work Australia guidance treats signs as one possible part of a wider traffic plan, not the whole control.
What size, material, reflectivity and mounting are available?
The verified face is 600 × 450 mm landscape on 1.6 mm aluminium. The base price is non-reflective; optional Class 400 reflective film is selectable at the displayed surcharge. Holes, lamination, Class 2 film, posts, brackets, height bars and mounting hardware are not included in this configurator.
What volume discounts apply?
Automatic volume pricing is 5–9 signs: 8% off, 10–24 signs: 15% off, 25–49 signs: 24% off, 50–99 signs: 32% off, 100+ signs: 40% off. The configurator is the source of truth and updates the unit price as quantity changes.
