On Freeway Sign
Product code: PSS-TRF-333
The On Freeway sign directs traffic onto motorways and high-speed routes. Cast in aluminium and available in 450×600 mm or 600×800 mm, it complies with AS 1319 for directional signage on controlled-access roads. Class 1 reflective sheeting enhances visibility for drivers at speed. Platinum Signs supports traffic authorities, contractors, and transport operators with competitive trade pricing and nationwide delivery on all quantities.
Material specification
This product is supplied only in Aluminium (1.6mm); choose the approved size below.
Use the size in the approved traffic-control plan or road-authority specification.
Includes $8.64 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $95.00 | — |
| 5-9 | $87.40 | 8% off |
| 10-24 | $80.75 | 15% off |
| 25-49 | $72.20 | 24% off |
| 50-99 | $64.60 | 32% off |
| 100+ | $57.00 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $95.00 | — |
| 5-9 | $87.40 | 8% off |
| 10-24 | $80.75 | 15% off |
| 25-49 | $72.20 | 24% off |
| 50-99 | $64.60 | 32% off |
| 100+ | $57.00 | 40% off |
Product details
The On Freeway sign directs traffic onto motorways and high-speed routes. Cast in aluminium and available in 450×600 mm or 600×800 mm, it complies with AS 1319 for directional signage on controlled-access roads. Class 1 reflective sheeting enhances visibility for drivers at speed. Platinum Signs supports traffic authorities, contractors, and transport operators with competitive trade pricing and nationwide delivery on all quantities.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Rigid aluminium sheet suited to long-term signage where corrosion resistance and dimensional stability matter.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent outdoor installations and high-durability sites
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 450 x 600mm | Up to 15m | Outdoor, site entrances |
Optional finishes
Reflective Class 1 (High Intensity)
High-intensity prismatic reflective film. Confirm the grade required by the project specification and relevant authority.
Available with vinyl or aluminium only.
Specifications
| Product code | PSS-TRF-333 |
|---|---|
| Product | On Freeway Sign |
| Category | Traffic & Road Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Aluminium (1.6mm) |
| Selected size | 450 x 600mm (Large) |
| Indicative durability | Long-term substrate; print and site conditions apply |
| Indicative viewing distance | Up to 15m |
| Available sizes | 450 x 600mm (Large), 600 x 800mm |
| Available materials | Aluminium (1.6mm) |
Selected specifications update with the material and size controls above.
Frequently asked questions
Does this sign meet freeway safety standards?
The appropriate safety-sign category, wording, placement and supporting controls depend on the product purpose, site risk and applicable jurisdiction. Confirm the requirement with your WHS adviser or regulator; a sign alone does not discharge WHS duties.
Which size should I choose for a freeway application?
The 600×800 mm size is recommended for freeways to ensure legibility at high speeds; 450×600 mm works well on secondary routes with lower traffic speeds.
Is reflective sheeting standard, or is it an upgrade?
The appropriate safety-sign category, wording, placement and supporting controls depend on the product purpose, site risk and applicable jurisdiction. Confirm the requirement with your WHS adviser or regulator; a sign alone does not discharge WHS duties.
Do you offer trade pricing for transport operators?
Yes. We provide dedicated trade account terms for transport companies, councils, and contractors. Bulk orders qualify for tiered discounts.
What's the lead time for delivery across Australia?
Standard production and delivery takes 5–7 business days. We can arrange faster turnaround for urgent projects—contact our team for availability.
