Platinum Signs
Stop (Black Dots) NSW Only Sign
SS-TRF-032 · Product data sheet
Data sheet
26 August 2026
https://www.platinumsigns.com.au
Description
The Stop (Black Dots) sign is a NSW-specific variant of the standard Stop sign, featuring a distinctive black dot pattern for local road applications. Manufactured to AS 1319 standards, it delivers the same durability and reliability as our other traffic control signs. Available in 600×600 mm, 750×750 mm, and 900×900 mm sizes, each aluminium sign can be upgraded with Class 1 reflective sheeting. Platinum Signs supports NSW councils, contractors, and private operators with trade pricing, bulk discounts, and prompt Australia-wide delivery.
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
- Category
- Traffic & Road Signs
- Sign selection
- Confirm against site requirements
- Artwork
- Off-the-shelf design supplied as shown
- Product code
- SS-TRF-032
Available materials
| Material | Specification |
|---|---|
| Aluminium (1.6mm) | Rigid aluminium sheet suited to long-term signage where corrosion resistance and dimensional stability matter. Indicative service life: Long-term substrate; print and site conditions apply. Typical use: Permanent outdoor installations and high-durability sites. |
Available sizes
- • 600 x 600mm
- • 750 x 750mm
- • 900 x 900mm
Volume pricing — Aluminium (1.6mm) · 600 x 600mm (inc. GST)
| Quantity | Unit price | Saving |
|---|---|---|
| 1-4 | $109.95 | — |
| 5-9 | $101.15 | -8% |
| 10-24 | $93.46 | -15% |
| 25-49 | $83.56 | -24% |
| 50-99 | $74.77 | -32% |
| 100+ | $65.97 | -40% |
Prices shown for the listed material/size combination. Full configuration pricing is available at https://www.platinumsigns.com.au/safety-signs/traffic/stop-black-dots-nsw-only.
Frequently asked
Is this sign only for use in NSW?
Yes, the Stop (Black Dots) variant is NSW-specific and should only be installed within New South Wales. Other states use the standard red octagonal Stop sign.
Does it comply with AS 1319?
The appropriate safety-sign category, wording, placement and supporting controls depend on the product purpose, site risk and applicable jurisdiction. Confirm the requirement with your WHS adviser or regulator; a sign alone does not discharge WHS duties.
What are the three available sizes used for?
600×600 mm is for local streets and driveways, 750×750 mm for standard intersections, and 900×900 mm for busier or higher-speed roads.
Can I order reflective versions?
Reflective grades provide different visibility performance. Choose the grade required by the project specification and site conditions, and confirm any road, traffic or high-risk requirement with the relevant authority before ordering.
Do you offer bulk pricing for NSW councils or contractors?
Automatic volume pricing is 5–9 signs: 8% off, 10–24 signs: 15% off, 25–49 signs: 24% off, 50–99 signs: 32% off, 100+ signs: 40% off. The configurator is the source of truth and updates the unit price as quantity changes.