Stop Here On Red Signal Sign
Product code: PSS-TRF-289
The Stop Here On Red Signal sign directs drivers to halt at the correct stopping position when traffic lights turn red, improving intersection safety and traffic management. Built to AS 1319 standards from corrosion-resistant aluminium, it remains legible and durable across Australia's varied climates.
Material specification
This product is supplied only in Aluminium (1.6mm); choose the approved size below.
Use the size in the approved traffic-control plan or road-authority specification.
Includes $8.64 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $95.00 | — |
| 5-9 | $87.40 | 8% off |
| 10-24 | $80.75 | 15% off |
| 25-49 | $72.20 | 24% off |
| 50-99 | $64.60 | 32% off |
| 100+ | $57.00 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $95.00 | — |
| 5-9 | $87.40 | 8% off |
| 10-24 | $80.75 | 15% off |
| 25-49 | $72.20 | 24% off |
| 50-99 | $64.60 | 32% off |
| 100+ | $57.00 | 40% off |
Product details
The Stop Here On Red Signal sign directs drivers to halt at the correct stopping position when traffic lights turn red, improving intersection safety and traffic management. Built to AS 1319 standards from corrosion-resistant aluminium, it remains legible and durable across Australia's varied climates.
Offered in two sizes—450×600 mm and 600×800 mm—both with Class 1 reflective coating for visibility day and night. Lightweight aluminium eliminates rust and extends service life on high-traffic routes. Platinum Signs supplies trade accounts with competitive bulk pricing and nationwide delivery to support your traffic control projects.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Rigid aluminium sheet suited to long-term signage where corrosion resistance and dimensional stability matter.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent outdoor installations and high-durability sites
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 450 x 600mm | Up to 15m | Outdoor, site entrances |
Optional finishes
Reflective Class 1 (High Intensity)
High-intensity prismatic reflective film. Confirm the grade required by the project specification and relevant authority.
Available with vinyl or aluminium only.
Specifications
| Product code | PSS-TRF-289 |
|---|---|
| Product | Stop Here On Red Signal Sign |
| Category | Traffic & Road Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Aluminium (1.6mm) |
| Selected size | 450 x 600mm (Large) |
| Indicative durability | Long-term substrate; print and site conditions apply |
| Indicative viewing distance | Up to 15m |
| Available sizes | 450 x 600mm (Large), 600 x 800mm |
| Available materials | Aluminium (1.6mm) |
Selected specifications update with the material and size controls above.
Frequently asked questions
What sizes are available for this sign?
Available sizes are 450 x 600mm (Large), 600 x 800mm. Viewing-distance notes are a practical selection aid, not a substitute for checking the approach distance, lighting, mounting position, wording and site risk assessment.
Does it meet Australian traffic standards?
The appropriate safety-sign category, wording, placement and supporting controls depend on the product purpose, site risk and applicable jurisdiction. Confirm the requirement with your WHS adviser or regulator; a sign alone does not discharge WHS duties.
What's the lifespan of the reflective coating?
Reflective grades provide different visibility performance. Choose the grade required by the project specification and site conditions, and confirm any road, traffic or high-risk requirement with the relevant authority before ordering.
Do you offer customisation for specific intersections?
Standard designs follow traffic control guidelines, but contact our team to discuss any project-specific requirements or bespoke modifications.
What's the best way to order for a multi-site rollout?
Set up a trade account to access volume pricing, streamlined ordering, and dedicated support for large-scale traffic control deployments.
