Stop Sound Horn Proceed Slowly Sign
Product code: PSS-TRF-357
Communicate multi-step driver instructions with this combination warning sign, compliant with AS 1319. Offered in aluminium, polypropylene, or Colorbond steel, with three sizes: 450×300 mm, 450×600 mm, and 600×400 mm. Pre-drilled holes simplify installation, and Class 2 reflective sheeting provides adequate visibility for controlled-speed areas. Commonly used at railway crossings, industrial sites, and private access points. Platinum Signs supplies trade customers and organisations nationwide with flexible ordering, competitive bulk rates, and reliable delivery to all states.
Material
Rigid aluminium sheet suited to long-term signage where corrosion resistance and dimensional stability matter.
Use the size in the approved traffic-control plan or road-authority specification.
Includes $4.55 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $50.00 | — |
| 5-9 | $46.00 | 8% off |
| 10-24 | $42.50 | 15% off |
| 25-49 | $38.00 | 24% off |
| 50-99 | $34.00 | 32% off |
| 100+ | $30.00 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $50.00 | — |
| 5-9 | $46.00 | 8% off |
| 10-24 | $42.50 | 15% off |
| 25-49 | $38.00 | 24% off |
| 50-99 | $34.00 | 32% off |
| 100+ | $30.00 | 40% off |
Product details
Communicate multi-step driver instructions with this combination warning sign, compliant with AS 1319. Offered in aluminium, polypropylene, or Colorbond steel, with three sizes: 450×300 mm, 450×600 mm, and 600×400 mm. Pre-drilled holes simplify installation, and Class 2 reflective sheeting provides adequate visibility for controlled-speed areas. Commonly used at railway crossings, industrial sites, and private access points. Platinum Signs supplies trade customers and organisations nationwide with flexible ordering, competitive bulk rates, and reliable delivery to all states.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Rigid aluminium sheet suited to long-term signage where corrosion resistance and dimensional stability matter.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent outdoor installations and high-durability sites
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent installations, harsh environments
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 450 x 600mm | Up to 15m | Outdoor, site entrances |
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Reflective Class 2 (Engineer Grade)
Engineer-grade reflective film for general site visibility. Confirm suitability for the lighting, approach distance and project specification.
Available with vinyl or aluminium only.
Specifications
| Product code | PSS-TRF-357 |
|---|---|
| Product | Stop Sound Horn Proceed Slowly Sign |
| Category | Traffic & Road Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Aluminium (1.6mm) |
| Selected size | 450 x 300mm |
| Indicative durability | Long-term substrate; print and site conditions apply |
| Indicative viewing distance | Confirm for the site |
| Available sizes | 450 x 300mm, 450 x 600mm (Large), 600 x 400mm |
| Available materials | Aluminium (1.6mm), Polypropylene (1.6mm), Colorbond Steel (0.6mm) |
Selected specifications update with the material and size controls above.
Frequently asked questions
Where is this sign typically used?
Common at railway level crossings, private industrial entrances, and controlled-access gates where sequential driver actions are required.
Is Class 2 reflective sufficient for this sign?
Reflective grades provide different visibility performance. Choose the grade required by the project specification and site conditions, and confirm any road, traffic or high-risk requirement with the relevant authority before ordering.
Which material should I choose for a railway crossing?
Aluminium or Colorbond are ideal for high-exposure rail environments; both resist moisture and vibration better than polypropylene.
Are the pre-drilled holes vandal-proof?
Yes. Four-corner pre-drilled holes are an optional extra with a base surcharge of $3.00 inc GST per sign for the listed configurations, before any applicable volume discount. Select the option to update the configured total before adding to cart.
Can the wording be changed to suit our site?
Custom text is available on orders of 5+ units. Provide your requirements and we'll deliver a quote and digital proof within 48 hours.
