Platinum Signs
High Voltage Sign
PS-WAR023 · Product data sheet
Data sheet
19 September 2026
https://www.platinumsigns.com.au
Description
Identify a high-voltage hazard with the exact PS-WAR023 warning face. A black lightning bolt sits inside the triangle, above the two-line HIGH VOLTAGE legend. Use this design where the person responsible for electrical safety has selected that warning for the equipment, enclosure or approach. The sign does not display a voltage value, an entry permission or an isolation status. Choose one 180 × 240 mm self-adhesive vinyl sign, or a rigid panel in 225 × 300 mm, 300 × 450 mm or 400 × 600 mm. Rigid options are 1.6 mm polypropylene, 0.6 mm Colorbond steel and 3 mm Corflute. Dimensions are width × height and the artwork remains portrait. The pictured artwork is included; unchanged catalogue signs do not require an upload or a separate design proof. Select the material, size and quantity, then check the delivery charge before paying. Most standard safety-sign orders dispatch the next business day after payment; courier transit is additional. Contact us first for a large order or an essential arrival date.
Select the sign through the electrical-safety arrangements for the installation. The sources below address electrical hazards and controls; they do not certify this printed product.
- Category
- Warning Signs
- Sign selection
- High-voltage electrical warning
- Artwork
- Off-the-shelf design supplied as shown
- Product code
- PS-WAR023
Available materials
| Material | Specification |
|---|---|
| Polypropylene (1.6mm) | A lightweight 1.6mm rigid warning face in three portrait formats for a site-approved wall, backing or holder. Arrange installation through authorised site personnel. Keep equipment labels, vents and controls clear. |
| Colorbond Steel (0.6mm) | A 0.6mm coated steel panel in three portrait formats for mechanical fixing to a suitable support. It has no electrical insulation rating. Use the fixing position and hardware approved for the electrical installation. Do not drill or open an enclosure without authorisation. |
| Corflute (3mm) | A lightweight 3mm fluted warning panel in three portrait formats for supported temporary placement. It is not an electrical protective barrier. Secure to the permitted backing or holder without crushing the flutes. Keep the complete warning visible on the approach. |
| Self-Adhesive Vinyl (Sticker) | One 180 × 240mm self-adhesive portrait warning face for a suitable smooth, clean surface. Use the permitted surface without covering equipment labels or operating instructions. Arrange safe access through authorised site personnel. |
Available sizes
- • 180 x 240mm — Self-Adhesive Vinyl (Sticker)
- • 225 x 300mm (Small) — Polypropylene (1.6mm) / Colorbond Steel (0.6mm) / Corflute (3mm)
- • 300 x 450mm (Medium) — Polypropylene (1.6mm) / Colorbond Steel (0.6mm) / Corflute (3mm)
- • 400 x 600mm — Polypropylene (1.6mm) / Colorbond Steel (0.6mm) / Corflute (3mm)
Volume pricing — Polypropylene (1.6mm) · 225 x 300mm (Small) (inc. GST)
| Quantity | Unit price | Saving |
|---|---|---|
| 1 | $26.95 | — |
| 5 | $24.79 | -8% |
| 10 | $22.91 | -15% |
| 25 | $20.48 | -24% |
| 50 | $18.33 | -32% |
| 100+ | $16.17 | -40% |
Prices shown for the listed material/size combination and quantities. Savings increase gradually between these quantities. Full configuration pricing is available at https://www.platinumsigns.com.au/safety-signs/warning/high-voltage-sign.
Frequently asked
What is printed on this High Voltage sign?
The PS-WAR023 face shows a black lightning bolt inside a warning triangle, followed by HIGH above VOLTAGE on yellow. It has no voltage number, KEEP OUT instruction or permission to enter. Confirm that this exact warning matches the installation requirement.
Which sizes and materials can I order?
Choose an individual 180 × 240 mm adhesive vinyl sign, or 225 × 300 mm, 300 × 450 mm or 400 × 600 mm rigid panels in polypropylene, Colorbond or Corflute. Rigid thicknesses are 1.6 mm, 0.6 mm and 3 mm respectively. All sizes are width × height; the ten combinations keep the pictured portrait design.
Is this the same as Danger High Voltage Keep Out?
No. This design has a yellow lightning-bolt warning face and the words HIGH VOLTAGE. Danger High Voltage Keep Out carries a different heading and an access instruction. Use the exact message specified for the site rather than substituting one because both mention electricity.
Can I attach the sign to electrical equipment myself?
Arrange the location and installation through the authorised site personnel. They need to confirm the mounting surface, access and fixing method. This sign does not authorise entry, opening or drilling an enclosure, or working near electrical parts.
Does polypropylene or Corflute make this an insulating sign?
No electrical insulation, arc-protection or barrier rating is supplied with these standard sign faces. Choose the material for the approved sign mounting arrangement; electrical protection must come from the controls specified for the installation.
When will the order dispatch?
Most standard safety-sign orders dispatch the next business day after payment. Courier transit is additional, and the delivery charge is shown before you pay. For a large quantity or an essential arrival date, contact us before ordering to discuss fulfilment.