Platinum Signs
Nailing Equipment in Use Sign
PSS-WAR-032 · Product data sheet
Data sheet
4 November 2026
https://www.platinumsigns.com.au
Description
Warn workers about nailing and fastening equipment hazards with this AS 1319-compliant warning sign. The yellow and black triangle format signals caution-level risk in construction sites, carpentry shops, and manufacturing areas where pneumatic or powder-actuated tools operate. Four standard sizes suit close-range workbenches through large construction zones. Choose corflute, polypropylene, Colorbond, or vinyl to match your site conditions. UV-stable inks maintain legibility in direct sunlight and harsh weather. Platinum Signs delivers trade-friendly bulk pricing and Australia-wide logistics.
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
- Category
- Warning Signs
- Sign selection
- Confirm against site requirements
- Artwork
- Off-the-shelf design supplied as shown
- Product code
- PSS-WAR-032
Available materials
| Material | Specification |
|---|---|
| Corflute (5mm) | Lightweight corrugated plastic board. Easy to fix to fences, hoarding, and temporary structures. Indicative service life: Temporary use; exposure and installation affect service life. Typical use: Construction sites, temporary signage, events. |
| Polypropylene (1.6mm) | Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure. Indicative service life: Medium-term use; site conditions apply. Typical use: Warehouses, factories, permanent indoor/outdoor. |
| Colorbond Steel (0.6mm) | Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting. Indicative service life: Long-term substrate; print and site conditions apply. Typical use: Permanent installations, harsh environments. |
| Self-Adhesive Vinyl (Sticker) | Peel-and-stick vinyl for smooth surfaces. Walls, doors, machinery, and equipment labelling. Indicative service life: Short- to medium-term use; surface and exposure affect service life. Typical use: Indoor walls, equipment labels, smooth surfaces. |
Available sizes
- • 225 x 300mm (Small)
- • 300 x 450mm (Medium)
- • 450 x 600mm (Large)
- • 600 x 900mm (Extra Large)
Volume pricing — Polypropylene (1.6mm) · 225 x 300mm (Small) (inc. GST)
| Quantity | Unit price | Saving |
|---|---|---|
| 1 | $20.95 | — |
| 5 | $19.27 | -8% |
| 10 | $17.81 | -15% |
| 25 | $15.92 | -24% |
| 50 | $14.25 | -32% |
| 100+ | $12.57 | -40% |
Prices shown for the listed material/size combination and quantities. Savings increase gradually between these quantities. Full configuration pricing is available at https://www.platinumsigns.com.au/safety-signs/warning/nailing-equipment-in-use.
Frequently asked
Should I post a nailing equipment sign at every workstation?
Yes, mount one at each nailing station and at entry points to areas where fastening tools are in active use. Workers should see the warning before handling or approaching the equipment.
What size sign works best on a construction site?
Available sizes are 225 x 300mm (Small), 300 x 450mm (Medium), 450 x 600mm (Large), 600 x 900mm (Extra Large). Viewing-distance notes are a practical selection aid, not a substitute for checking the approach distance, lighting, mounting position, wording and site risk assessment.
Is this sign required by law on Australian construction sites?
AS 1319 recommends warning signage for hazardous equipment. Your site safety plan and risk assessment should specify signage requirements; check with your principal contractor or safety officer.
Will a corflute sign survive a busy construction site?
Corflute is lightweight and affordable but less impact-resistant. For high-traffic or rough-handling sites, polypropylene or Colorbond steel offer greater durability at modest cost premium.
Can I order custom signs with our company logo?
Absolutely. Platinum Signs produces branded nailing equipment signs with your logo and facility details. Request a custom quote and we'll deliver within 7–10 business days.