Platinum Signs
No Bodyboards Sign
PSS-WS-BCH-0012 · Product data sheet
Data sheet
19 September 2026
https://www.platinumsigns.com.au
Description
This AS 2416.1 prohibition sign marks zones where bodyboarding isn't permitted, commonly deployed alongside No Surfing notices in designated swim-only areas. The red annulus with bodyboard pictogram provides clear visual prohibition that meets Australian water safety standards. Available in polypropylene or marine aluminium across three sizes (300×450 mm through 600×900 mm), with optional pre-drilled holes and lamination for extended durability. Aluminium construction suits permanent beachfront installations exposed to salt spray and UV, while polypropylene offers a cost-effective option for temporary or inland applications. Trade accounts receive bulk pricing on multi-site deployments. Australia-wide delivery available; contact our team for volume quotes on council or resort-wide rollouts.
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
- Category
- Water Safety Signs
- Sign selection
- Confirm against site requirements
- Artwork
- Off-the-shelf design supplied as shown
- Product code
- PSS-WS-BCH-0012
Available materials
| Material | Specification |
|---|---|
| Polypropylene (1.6mm) | Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure. Indicative service life: Medium-term use; site conditions apply. Typical use: Warehouses, factories, permanent indoor/outdoor. |
| Aluminium (1.6mm) | Rigid aluminium sheet suited to long-term signage where corrosion resistance and dimensional stability matter. Indicative service life: Long-term substrate; print and site conditions apply. Typical use: Permanent outdoor installations and high-durability sites. |
Available sizes
- • 300 x 450mm (Medium)
- • 450 x 600mm (Large)
- • 600 x 900mm (Extra Large)
Volume pricing — Polypropylene (1.6mm) · 300 x 450mm (Medium) (inc. GST)
| Quantity | Unit price | Saving |
|---|---|---|
| 1 | $31.95 | — |
| 5 | $29.39 | -8% |
| 10 | $27.16 | -15% |
| 25 | $24.28 | -24% |
| 50 | $21.73 | -32% |
| 100+ | $19.17 | -40% |
Prices shown for the listed material/size combination and quantities. Savings increase gradually between these quantities. Full configuration pricing is available at https://www.platinumsigns.com.au/safety-signs/water-safety/water-safety-no-bodyboards-picto.
Frequently asked
Can I install this with a No Surfing sign?
Yes — councils and beach managers typically pair both signs to fully mark the no-craft boundary in swim-only zones, creating a complete prohibition framework.
Which material lasts longer in coastal conditions?
Marine aluminium withstands salt spray and UV indefinitely with minimal maintenance. Polypropylene suits 3–5 years in beachfront exposure; consider lamination to extend life.
What size should I order for a typical beach entry point?
Available sizes are 300 x 450mm (Medium), 450 x 600mm (Large), 600 x 900mm (Extra Large). Viewing-distance notes are a practical selection aid, not a substitute for checking the approach distance, lighting, mounting position, wording and site risk assessment.
Do you offer bulk discounts for multiple beaches?
Volume-pricing examples are 5 signs: 8% off, 10 signs: 15% off, 25 signs: 24% off, 50 signs: 32% off, 100 signs: 40% off. Savings increase gradually between these quantities. The total increases as you add more signs, while the average price per sign falls or stays the same. The configurator calculates the total for your selected quantity.
Can I get pre-drilled holes for pole mounting?
Yes. Four-corner pre-drilled holes are an optional extra with a base surcharge of $3.00 inc GST per sign for the listed configurations, before any applicable volume discount. Select the option to update the configured total before adding to cart.