Danger — 11,000 Volts Sign
Product code: PSS-ELEC-003
Protect personnel from 11kV high-voltage hazards with this AS 1319 compliant danger sign. The standard red header and lightning bolt pictogram clearly identify the presence of 11,000-volt equipment at substations, transformer enclosures, and switchgear installations across Australian electricity networks.
Material
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $2.45 GST · freight separate
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Price per sign | Discount |
|---|---|---|
| 1 | $24.50 ex GST$26.95 inc GST | — |
| 5 | $22.54 ex GST$24.79 inc GST | 8% off |
| 10 | $20.83 ex GST$22.91 inc GST | 15% off |
| 25 | $18.62 ex GST$20.48 inc GST | 24% off |
| 50 | $16.66 ex GST$18.33 inc GST | 32% off |
| 100+ | $14.70 ex GST$16.17 inc GST | 40% off |
Prices shown are for the listed quantities. Savings increase gradually between them; the total always increases as you add more.
View volume pricing
| Quantity | Price per sign | Discount |
|---|---|---|
| 1 | $24.50 ex GST$26.95 inc GST | — |
| 5 | $22.54 ex GST$24.79 inc GST | 8% off |
| 10 | $20.83 ex GST$22.91 inc GST | 15% off |
| 25 | $18.62 ex GST$20.48 inc GST | 24% off |
| 50 | $16.66 ex GST$18.33 inc GST | 32% off |
| 100+ | $14.70 ex GST$16.17 inc GST | 40% off |
Prices shown are for the listed quantities. Savings increase gradually between them; the total always increases as you add more.
Product details
Protect personnel from 11kV high-voltage hazards with this AS 1319 compliant danger sign. The standard red header and lightning bolt pictogram clearly identify the presence of 11,000-volt equipment at substations, transformer enclosures, and switchgear installations across Australian electricity networks.
Supplied in Colorbond, polypropylene, aluminium, or vinyl in sizes from 225×300 mm to 600×900 mm. Reflective Class 1 and Class 2 options boost visibility in outdoor or low-light conditions. Mounting holes included. Platinum Signs serves electricity distributors, facility managers, and contractors with bulk pricing, Australia-wide delivery, and rapid turnaround on large orders.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent installations, harsh environments
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Rigid aluminium sheet suited to long-term signage where corrosion resistance and dimensional stability matter.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent outdoor installations and high-durability sites
Peel-and-stick vinyl for smooth surfaces. Walls, doors, machinery, and equipment labelling.
Indicative durability: Short- to medium-term use; surface and exposure affect service life · Typical use: Indoor walls, equipment labels, smooth surfaces
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 225 x 300mm | Up to 5m | Indoor, close range |
| 300 x 450mm | Up to 10m | Standard indoor/outdoor |
| 450 x 600mm | Up to 15m | Outdoor, site entrances |
| 600 x 900mm | Up to 25m | Large sites, high visibility |
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Reflective Class 1 (High Intensity)
High-intensity prismatic reflective film. Confirm the grade required by the project specification and relevant authority.
Available with vinyl or aluminium only.
Reflective Class 2 (Engineer Grade)
Engineer-grade reflective film for general site visibility. Confirm suitability for the lighting, approach distance and project specification.
Available with vinyl or aluminium only.
Specifications
| Product code | PSS-ELEC-003 |
|---|---|
| Product | Danger — 11,000 Volts Sign |
| Category | Electrical Safety Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Polypropylene (1.6mm) |
| Selected size | 225 x 300mm (Small) |
| Indicative durability | Medium-term use; site conditions apply |
| Indicative viewing distance | Up to 5m |
| Available sizes | 225 x 300mm (Small), 300 x 450mm (Medium), 450 x 600mm (Large), 600 x 900mm (Extra Large) |
| Available materials | Colorbond Steel (0.6mm), Polypropylene (1.6mm), Aluminium (1.6mm), Self-Adhesive Vinyl (Sticker) |
Selected specifications update with the material and size controls above.
Frequently asked questions
Where must 11kV signs be installed?
Place signs at all entry points to 11kV substations, around pad-mount transformers, on high-voltage switchgear enclosures, and at any location where 11,000V equipment is present and accessible.
Is this sign required by law?
Yes. AS 1319 mandates danger signs for high-voltage installations. Electricity distributors and facility operators must comply with electrical safety standards.
What material withstands outdoor substation conditions?
Colorbond steel offers excellent corrosion resistance and durability in harsh outdoor environments. Polypropylene is lightweight and cost-effective but less robust over many years.
Should I choose Class 1 or Class 2 reflective for substations?
Reflective grades provide different visibility performance. Choose the grade required by the project specification and site conditions, and confirm any road, traffic or high-risk requirement with the relevant authority before ordering.
Do you offer bulk pricing for electricity distributors?
Volume-pricing examples are 5 signs: 8% off, 10 signs: 15% off, 25 signs: 24% off, 50 signs: 32% off, 100 signs: 40% off. Savings increase gradually between these quantities. The total increases as you add more signs, while the average price per sign falls or stays the same. The configurator calculates the total for your selected quantity.
