Danger — 240 Volts Sign
Product code: PSS-ELEC-001
Protect workers and the public from 240-volt electrical hazards with this AS 1319 compliant danger sign. The red header and lightning bolt pictogram are instantly recognisable and meet Australian safety standards for mains-voltage equipment labelling.
Material
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $2.45 GST · freight separate
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Price per sign | Discount |
|---|---|---|
| 1 | $24.50 ex GST$26.95 inc GST | — |
| 5 | $22.54 ex GST$24.79 inc GST | 8% off |
| 10 | $20.83 ex GST$22.91 inc GST | 15% off |
| 25 | $18.62 ex GST$20.48 inc GST | 24% off |
| 50 | $16.66 ex GST$18.33 inc GST | 32% off |
| 100+ | $14.70 ex GST$16.17 inc GST | 40% off |
Prices shown are for the listed quantities. Savings increase gradually between them; the total always increases as you add more.
View volume pricing
| Quantity | Price per sign | Discount |
|---|---|---|
| 1 | $24.50 ex GST$26.95 inc GST | — |
| 5 | $22.54 ex GST$24.79 inc GST | 8% off |
| 10 | $20.83 ex GST$22.91 inc GST | 15% off |
| 25 | $18.62 ex GST$20.48 inc GST | 24% off |
| 50 | $16.66 ex GST$18.33 inc GST | 32% off |
| 100+ | $14.70 ex GST$16.17 inc GST | 40% off |
Prices shown are for the listed quantities. Savings increase gradually between them; the total always increases as you add more.
Product details
Protect workers and the public from 240-volt electrical hazards with this AS 1319 compliant danger sign. The red header and lightning bolt pictogram are instantly recognisable and meet Australian safety standards for mains-voltage equipment labelling.
Required on switchboards, distribution boards, power outlets in industrial settings, and any electrical enclosure where contact is possible. Supplied in Colorbond, polypropylene, aluminium, or vinyl in four sizes from 225×300 mm to 450×600 mm. Choose reflective Class 1 or Class 2 for improved visibility in low light. Mounting holes included. Trade accounts receive bulk discounts and priority dispatch.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent installations, harsh environments
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Rigid aluminium sheet suited to long-term signage where corrosion resistance and dimensional stability matter.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent outdoor installations and high-durability sites
Peel-and-stick vinyl for smooth surfaces. Walls, doors, machinery, and equipment labelling.
Indicative durability: Short- to medium-term use; surface and exposure affect service life · Typical use: Indoor walls, equipment labels, smooth surfaces
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 225 x 300mm | Up to 5m | Indoor, close range |
| 300 x 450mm | Up to 10m | Standard indoor/outdoor |
| 450 x 600mm | Up to 15m | Outdoor, site entrances |
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Reflective Class 1 (High Intensity)
High-intensity prismatic reflective film. Confirm the grade required by the project specification and relevant authority.
Available with vinyl or aluminium only.
Reflective Class 2 (Engineer Grade)
Engineer-grade reflective film for general site visibility. Confirm suitability for the lighting, approach distance and project specification.
Available with vinyl or aluminium only.
Specifications
| Product code | PSS-ELEC-001 |
|---|---|
| Product | Danger — 240 Volts Sign |
| Category | Electrical Safety Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Polypropylene (1.6mm) |
| Selected size | 225 x 300mm (Small) |
| Indicative durability | Medium-term use; site conditions apply |
| Indicative viewing distance | Up to 5m |
| Available sizes | 225 x 300mm (Small), 300 x 450mm (Medium), 450 x 600mm (Large) |
| Available materials | Colorbond Steel (0.6mm), Polypropylene (1.6mm), Aluminium (1.6mm), Self-Adhesive Vinyl (Sticker) |
Selected specifications update with the material and size controls above.
Frequently asked questions
Is a 240V danger sign a legal requirement?
Yes. Australian WHS regulations and AS 3000 Wiring Rules require electrical equipment above 50V AC to be labelled with voltage identification. AS 1319 specifies the danger sign format for 240V installations.
Where exactly should I install this sign?
Mount on or immediately adjacent to switchboards, distribution boards, industrial power outlets, and any electrical enclosure accessible to workers or the public. Position at eye level for maximum visibility.
What's the difference between Class 1 and Class 2 reflective?
Reflective grades provide different visibility performance. Choose the grade required by the project specification and site conditions, and confirm any road, traffic or high-risk requirement with the relevant authority before ordering.
Which material is best for a humid or corrosive environment?
Colorbond steel resists rust and corrosion in damp conditions. Vinyl is lightweight and chemical-resistant but less durable long-term. Polypropylene offers good corrosion resistance at a lower cost.
Do you offer bulk pricing for multiple sites?
Volume-pricing examples are 5 signs: 8% off, 10 signs: 15% off, 25 signs: 24% off, 50 signs: 32% off, 100 signs: 40% off. Savings increase gradually between these quantities. The total increases as you add more signs, while the average price per sign falls or stays the same. The configurator calculates the total for your selected quantity.
