Keep Left Sign – Arrow Left
Product code: PS-TRF106
Direct traffic to the left of the sign with the exact KEEP LEFT legend and down-left arrow shown. Choose the specified size and reflectivity, then confirm placement and approval for the site.
Material specification
This product is supplied only in Aluminium (1.6mm); choose the approved size below.
Use the size in the approved traffic-control plan or road-authority specification.
Includes $8.64 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $95.00 | — |
| 5-9 | $87.40 | 8% off |
| 10-24 | $80.75 | 15% off |
| 25-49 | $72.20 | 24% off |
| 50-99 | $64.60 | 32% off |
| 100+ | $57.00 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $95.00 | — |
| 5-9 | $87.40 | 8% off |
| 10-24 | $80.75 | 15% off |
| 25-49 | $72.20 | 24% off |
| 50-99 | $64.60 | 32% off |
| 100+ | $57.00 | 40% off |
Product details
Confirm the left-hand face
The verified artwork reads KEEP LEFT and the arrow points down-left. Check the driver approach and approved drawing before ordering; a Keep Right face, lane-control message or supplementary panel is a different product and should not be substituted by rotating or repositioning this artwork.
Select the specified R2-3 size
Choose 450 × 600 mm R2-3A(L) or 600 × 800 mm R2-3B(L) from the project schedule. Both are portrait 1.6 mm aluminium faces. The larger size should only be selected where the design documents or verified site conditions call for it.
Treat reflectivity as a project requirement
Base pricing is for non-reflective aluminium. Class 400 reflective sheeting is optional in the configurator. The NSW R2-3 road-sign drawing specifies a Class 400 white reflectorised ground, so confirm and select the required construction rather than assuming the base face is suitable for a regulated or night-time application.
Plan placement, support and approval
The printed face does not define its own location or mounting. Confirm which side drivers must pass, along with the support, hole pattern, height, lateral clearance, visibility and authority approval. Drilling, posts and brackets are not included in the standard product.
Check the sign format before ordering
The current Transport for NSW R2-3 drawing verifies the listed left-hand designs and sizes, while Queensland road-sign guidance explains the driving instruction. The product face does not by itself determine placement, approve public-road use or certify the complete installed sign system. Confirm the relevant authority, specification and site details.
- Transport for NSW – R2-3 Keep Left traffic-sign drawing — The official drawing identifies the 450 × 600 mm R2-3A(L) and 600 × 800 mm R2-3B(L) designs and specifies an aluminium sign with black legend, symbol and border on a Class 400 white reflectorised ground. Read source (opens in a new tab)NSW design drawing only; confirm the current drawing revision, project specification and approval for the installation location.
- Queensland Government – Regulatory signs — Queensland guidance explains that at a keep left sign a driver must drive to the left of the sign, showing why the installed position and driver approach are part of the instruction. Read source (opens in a new tab)Queensland road-user guidance only; it does not approve this product or its installation in another jurisdiction.
Before ordering
- Confirm that the exact KEEP LEFT legend and down-left arrow match the approved direction of travel.
- Choose 450 × 600 mm R2-3A(L) or 600 × 800 mm R2-3B(L) from the verified sign schedule.
- Select Class 400 reflectivity where the project specifies a reflectorised road-sign face.
- Specify drilling, posts, brackets, mounting height and lateral clearances separately.
- Obtain any required road-authority approval and verify the complete installation before public-road use.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Product guidance reviewed by Platinum Signs product and editorial team. Last reviewed: .
Material options
Rigid aluminium sheet suited to long-term signage where corrosion resistance and dimensional stability matter.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent outdoor installations and high-durability sites
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 450 x 600mm | Up to 15m | Outdoor, site entrances |
Optional finishes
Reflective Class 1 (High Intensity)
High-intensity prismatic reflective film. Confirm the grade required by the project specification and relevant authority.
Available with vinyl or aluminium only.
Specifications
| Product code | PS-TRF106 |
|---|---|
| Selected SKU | PS-TRF106-450X600-AL16 |
| Product | Keep Left Sign – Arrow Left |
| Category | Traffic & Road Signs |
| Format guidance | Black KEEP LEFT legend, down-left arrow and rounded border on a white portrait face; confirm the left-hand direction before ordering |
| Printing | UV direct print |
| Selected material | Aluminium (1.6mm) |
| Selected size | 450 x 600mm (Large) |
| Indicative durability | Long-term substrate; print and site conditions apply |
| Indicative viewing distance | Up to 15m |
| Available sizes | 450 x 600mm (Large), 600 x 800mm |
| Available materials | Aluminium (1.6mm) |
Selected specifications update with the material and size controls above.
Frequently asked questions
What is printed on this Keep Left sign?
The approved portrait artwork has the exact black legend KEEP LEFT, a black down-left arrow and a black rounded border on a white field. It does not include a right arrow, lane wording or a supplementary panel.
What does a Keep Left sign mean?
Queensland Government road-sign guidance says a driver at a keep left sign must drive to the left of the sign. The installed position is therefore part of the instruction: confirm the approved traffic drawing or private-site layout before placing the face beside an island, obstruction or divided approach.
Which Keep Left sizes are available?
The listed portrait faces are 450 × 600 mm R2-3A(L) and 600 × 800 mm R2-3B(L). Those designations and dimensions are shown on the current Transport for NSW traffic-sign drawing. Use the size specified by the project rather than scaling from the artwork alone.
Is reflective sheeting included?
The base aluminium price is non-reflective. Class 400 reflective sheeting, labelled Class 400 (legacy Class 1) in the configurator, is optional at the displayed surcharge. The Transport for NSW R2-3 drawing specifies a Class 400 white reflectorised ground for its road-sign construction, but selecting that option alone does not approve an installation or verify every project requirement.
Are posts, brackets or mounting holes included?
No. The standard product does not include drilling, posts, brackets or a support system. Confirm the hole pattern, support, mounting height, lateral position, clearances and any impact requirements from the approved project documents before ordering installation work.
What volume discounts apply?
Automatic volume pricing is 5–9 signs: 8% off, 10–24 signs: 15% off, 25–49 signs: 24% off, 50–99 signs: 32% off, 100+ signs: 40% off. The configurator is the source of truth and updates the unit price as quantity changes.
