Stop (Black Dots) NSW Only Sign
Product code: SS-TRF-032
The Stop (Black Dots) sign is a NSW-specific variant of the standard Stop sign, featuring a distinctive black dot pattern for local road applications. Manufactured to AS 1319 standards, it delivers the same durability and reliability as our other traffic control signs.
Material specification
This product is supplied only in Aluminium (1.6mm); choose the approved size below.
Use the size in the approved traffic-control plan or road-authority specification.
Includes $10.00 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $109.95 | — |
| 5-9 | $101.15 | 8% off |
| 10-24 | $93.46 | 15% off |
| 25-49 | $83.56 | 24% off |
| 50-99 | $74.77 | 32% off |
| 100+ | $65.97 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $109.95 | — |
| 5-9 | $101.15 | 8% off |
| 10-24 | $93.46 | 15% off |
| 25-49 | $83.56 | 24% off |
| 50-99 | $74.77 | 32% off |
| 100+ | $65.97 | 40% off |
Product details
The Stop (Black Dots) sign is a NSW-specific variant of the standard Stop sign, featuring a distinctive black dot pattern for local road applications. Manufactured to AS 1319 standards, it delivers the same durability and reliability as our other traffic control signs.
Available in 600×600 mm, 750×750 mm, and 900×900 mm sizes, each aluminium sign can be upgraded with Class 1 reflective sheeting. Platinum Signs supports NSW councils, contractors, and private operators with trade pricing, bulk discounts, and prompt Australia-wide delivery.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Rigid aluminium sheet suited to long-term signage where corrosion resistance and dimensional stability matter.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent outdoor installations and high-durability sites
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 600 x 600mm | Project-specific | Road and traffic applications |
| 750 x 750mm | Project-specific | Road and traffic applications |
| 900 x 900mm | Project-specific | Road and traffic applications |
Optional finishes
Reflective Class 1 (High Intensity)
High-intensity prismatic reflective film. Confirm the grade required by the project specification and relevant authority.
Available with vinyl or aluminium only.
Specifications
| Product code | SS-TRF-032 |
|---|---|
| Product | Stop (Black Dots) NSW Only Sign |
| Category | Traffic & Road Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Aluminium (1.6mm) |
| Selected size | 600 x 600mm |
| Indicative durability | Long-term substrate; print and site conditions apply |
| Indicative viewing distance | Project-specific |
| Available sizes | 600 x 600mm, 750 x 750mm, 900 x 900mm |
| Available materials | Aluminium (1.6mm) |
Selected specifications update with the material and size controls above.
Frequently asked questions
Is this sign only for use in NSW?
Yes, the Stop (Black Dots) variant is NSW-specific and should only be installed within New South Wales. Other states use the standard red octagonal Stop sign.
Does it comply with AS 1319?
The appropriate safety-sign category, wording, placement and supporting controls depend on the product purpose, site risk and applicable jurisdiction. Confirm the requirement with your WHS adviser or regulator; a sign alone does not discharge WHS duties.
What are the three available sizes used for?
600×600 mm is for local streets and driveways, 750×750 mm for standard intersections, and 900×900 mm for busier or higher-speed roads.
Can I order reflective versions?
Reflective grades provide different visibility performance. Choose the grade required by the project specification and site conditions, and confirm any road, traffic or high-risk requirement with the relevant authority before ordering.
Do you offer bulk pricing for NSW councils or contractors?
Automatic volume pricing is 5–9 signs: 8% off, 10–24 signs: 15% off, 25–49 signs: 24% off, 50–99 signs: 32% off, 100+ signs: 40% off. The configurator is the source of truth and updates the unit price as quantity changes.
