Warning — Use Static Grounding Devices Sign
Product code: PSS-ELEC-023
This warning sign mandates the use of static grounding devices in environments where static electricity could ignite flammable vapours, gases, or dusts. Commonly required in chemical plants, petrol stations, paint spray booths, and grain handling facilities to reinforce safe work procedures.
Material
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $2.45 GST · freight separate
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Price per sign | Discount |
|---|---|---|
| 1 | $24.50 ex GST$26.95 inc GST | — |
| 5 | $22.54 ex GST$24.79 inc GST | 8% off |
| 10 | $20.83 ex GST$22.91 inc GST | 15% off |
| 25 | $18.62 ex GST$20.48 inc GST | 24% off |
| 50 | $16.66 ex GST$18.33 inc GST | 32% off |
| 100+ | $14.70 ex GST$16.17 inc GST | 40% off |
Prices shown are for the listed quantities. Savings increase gradually between them; the total always increases as you add more.
View volume pricing
| Quantity | Price per sign | Discount |
|---|---|---|
| 1 | $24.50 ex GST$26.95 inc GST | — |
| 5 | $22.54 ex GST$24.79 inc GST | 8% off |
| 10 | $20.83 ex GST$22.91 inc GST | 15% off |
| 25 | $18.62 ex GST$20.48 inc GST | 24% off |
| 50 | $16.66 ex GST$18.33 inc GST | 32% off |
| 100+ | $14.70 ex GST$16.17 inc GST | 40% off |
Prices shown are for the listed quantities. Savings increase gradually between them; the total always increases as you add more.
Product details
This warning sign mandates the use of static grounding devices in environments where static electricity could ignite flammable vapours, gases, or dusts. Commonly required in chemical plants, petrol stations, paint spray booths, and grain handling facilities to reinforce safe work procedures.
Available in Colorbond, polypropylene, or vinyl across three sizes (225×300 mm to 450×600 mm). All units include pre-drilled holes for secure mounting. Trade customers receive bulk pricing and Australia-wide delivery to ensure compliance across multi-location operations.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent installations, harsh environments
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Peel-and-stick vinyl for smooth surfaces. Walls, doors, machinery, and equipment labelling.
Indicative durability: Short- to medium-term use; surface and exposure affect service life · Typical use: Indoor walls, equipment labels, smooth surfaces
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 225 x 300mm | Up to 5m | Indoor, close range |
| 300 x 450mm | Up to 10m | Standard indoor/outdoor |
| 450 x 600mm | Up to 15m | Outdoor, site entrances |
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Specifications
| Product code | PSS-ELEC-023 |
|---|---|
| Product | Warning — Use Static Grounding Devices Sign |
| Category | Electrical Safety Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Polypropylene (1.6mm) |
| Selected size | 225 x 300mm (Small) |
| Indicative durability | Medium-term use; site conditions apply |
| Indicative viewing distance | Up to 5m |
| Available sizes | 225 x 300mm (Small), 300 x 450mm (Medium), 450 x 600mm (Large) |
| Available materials | Colorbond Steel (0.6mm), Polypropylene (1.6mm), Self-Adhesive Vinyl (Sticker) |
Selected specifications update with the material and size controls above.
Frequently asked questions
Where is this sign typically required?
Chemical plants, fuel depots, paint booths, and grain stores—anywhere static electricity could ignite flammable atmospheres.
Is this sign a regulatory requirement?
In many hazardous work environments, yes. Check your industry code of practice or consult your safety officer to confirm requirements for your site.
Can I combine this with other electrical safety signs?
Absolutely—many facilities use multiple signs to address different hazards; we can help coordinate a cohesive safety signage strategy.
What material withstands fuel vapour exposure?
Vinyl and polypropylene resist chemical degradation better than some coatings; Colorbond is also suitable if properly maintained.
How often should signs be replaced?
Inspect annually for fading or damage; UV-resistant materials last 3–5 years outdoors before colour loss becomes noticeable.
