A reception lock-up
The red arriba wordmark and its grey tagline were built as dimensional acrylic letters, around 1500 mm wide, and fixed to the reception wall as a single aligned lock-up rather than as separate pieces.
Sydney CBD project · Workplace signage package
Arriba Group's Sydney office needed three pieces of branding working together across the floor: a dimensional lock-up that carries reception, a short cut vinyl statement in the lounge, and the company's five values set out on clear acrylic. The package was surveyed, built in our own workshop and installed on site.
Sydney CBD, NSW · Surveyed May 2026, installed June 2026

The reception lock-up
The Arriba Group lock-up was built as dimensional acrylic letters — the red wordmark and the grey tagline set out together and fixed flush to the reception wall so the whole lock-up reads as one clean line.
The project in detail
Photographs of the Arriba Group signage — the cut vinyl statement in the lounge, the five values panels floated across the office wall, the finished reception lock-up on the bench in our workshop, and the same lock-up installed above the reception desk.
Photographs of the Arriba Group work — the completed Sydney installation and the reception lock-up shown both on the bench in our workshop and up on the reception wall.
Project at a glance
This was a small package with three distinct problems in it. Each element sat on a different wall, took a different substrate and had its own setting-out to solve.
The red arriba wordmark and its grey tagline were built as dimensional acrylic letters, around 1500 mm wide, and fixed to the reception wall as a single aligned lock-up rather than as separate pieces.
In the lounge, the line 'Empowering lives together' was applied as contour-cut vinyl, around 2000 mm across, so only the words sit on the paint with no visible background around them.
The group's five values — Customer-focused, People-passionate, Quality-orientated, Innovation-driven and Dynamic and Agile — were set out on individual clear acrylic panels floated off the wall on silver standoffs.
How it came together
Three elements on three walls means three separate set-outs: the reception line, the lounge statement and the values grid all have to sit level and centred on surfaces that are fixed before we arrive. The job started with a site inspection and worked from those measurements.
The reception wall, the lounge wall and the values wall were measured and photographed on site so each element could be set out to the real surface rather than to a floor plan.
The reception lock-up, the wall statement and the five value panels were mocked up and signed off together before anything was produced, so the brand colours and the values wording were locked in one pass.
The letters were cut from 10 mm acrylic and face UV-printed in the brand colours; the statement was digitally printed on self-adhesive vinyl with a matte laminate and contour cut; the five panels were UV printed on 6 mm clear acrylic and laser cut with polished edges.
The reception letters were set out and fixed with double-sided tape and silicone, the vinyl statement was applied to the lounge wall, and the five acrylic panels were mounted on silver standoffs to a level grid.
Project anatomy
A reception line, a wall statement and a values grid each ask for a different decision. One needs depth and a colour that is part of the letter; one needs to disappear into the wall; one needs to read as glass.
The reception letters are cut from 10 mm acrylic and printed on the face in the brand's red and grey, so the colour is part of the letter rather than a vinyl overlay that can lift at the edges.
Explore acrylic signsThe lounge statement is digitally printed on self-adhesive vinyl, laminated matte and contour cut, so only the words sit on the paint with no visible carrier and no flare under the downlights.
Explore wall graphicsEach values panel is 6 mm clear acrylic with laser-cut polished edges, held off the wall on four silver barrel standoffs so the panel casts a shadow and reads as glass.
Explore office signageMaterial decision
Standoff-mounting lifts each clear acrylic panel a few millimetres off the wall. The shadow line that creates is what makes 6 mm acrylic read as glass rather than as a sticker — and it lets the five panels sit as a considered grid instead of flat tiles.
Standoff centres and panel size should be matched to the wall and the artwork on each project rather than carried across from this one.
Pricing context
Packages like this are quoted line by line against the surveyed site. We explain the cost drivers without publishing Arriba Group's commercial terms.
Send photographs of the walls, approximate dimensions and vector artwork for a current indication. Final pricing follows the confirmed survey.
Technical detail
The main story stays visual and easy to scan. Open these sections for the delivered scope, the evidence in the photography and the specifications that still need a site-specific review.
The Trello record and owned project photographs support the following Sydney office-signage scope.
These details belong to this Arriba Group project and should not be transferred to another site without review.
Walls, finishes and artwork vary between tenancies, so the survey drives the specification.
Sydney proof · National capability
This case study documents a single Arriba Group tenancy in Sydney. For businesses running several offices, Platinum Signs can hold one approved artwork and material standard across the network while surveying each floor for wall type, access and install timing.
Prepare a useful brief
A clear first brief lets the team assess format, finish, fixing and install sequencing before confirming scope and price.
Include the reception wall, any statement wall and the wall for values or wayfinding panels, with enough context to see the surrounding finishes.
Send the reception lock-up, any tagline, and the final list of values or panel content so the artwork can be set out once.
Supply the approved logo files, brand colours and any guidance on lock-ups, spacing or minimum sizes.
Confirm building access, induction requirements, permitted install hours and whether any existing signage must come down first.
Frequently asked questions
Practical answers about dimensional letters, cut vinyl statements, standoff-mounted acrylic, pricing inputs and multi-office delivery.
Related capability
Use the completed Sydney fit-out as visual proof, then move into the sign service that matches your own office brief.
Plan connected reception, statement, values and wayfinding signs for one workplace or many.
Explore office signageCompare clear, colour and face-printed acrylic formats for letters and panels that need a polished finish.
Explore acrylic signsReview printed and cut vinyl options for statements, feature walls and branded office interiors.
Explore wall graphicsTrusted by
Platinum Signs supports retail, property, construction, infrastructure, hospitality, workplace, government, education and corporate clients across Australia.




Reviews
Selected Google reviews about Platinum Signs
“I have worked with Platinum Signs for years and I can only say one thing: they live up to their name! It is rare to find a company that has the capability to become a true extension of your business.”
“The communication of Platinum Signs was just amazing, as was the finished product. Our client was immensely pleased at how the architect's drawings were brought to life. We have already recommended Platinum Signs to our other clients.”
“I've worked with Platinum Signs on two projects now and both have definitely exceeded my expectations. Yago and the team have consistently delivered.”
Office signage and rollouts
Send photographs of your walls, your wording and your vector artwork. We will help define the right format, finish, fixing and install sequence.