The identity update
The earlier horizontal mark was replaced with the approved stacked One Buyers Agency wordmark, giving the reception area a more editorial and recognisable focal point.
Double Bay project · Office feature wall
One Buyers Agency 3D acrylic office signage in Double Bay.
A workplace identity update for One Buyers Agency, replacing the previous wall sign with approximately 1.6 metres of fine black acrylic lettering set across a curved, fluted reception feature wall.
Double Bay, Sydney · Completed August 2024
Completed Double Bay identity
The revised stacked wordmark creates a confident focal point within the furnished office reception area.
- Location
- Double Bay, Sydney, NSW
- Completed
- August 2024
- Identity size
- Approx. 1600 × 1600 mm
- Construction
- 6 mm black acrylic lettering
The project in detail
From the previous identity to the completed feature wall.
Three additional owned photographs show the completed identity, the previous sign and the acrylic depth without repeating the hero image.
The page uses four distinct owned photographs from the same Double Bay project: one hero, one separate completed view and two records of the sign before replacement.
Project at a glance
A sharper identity for a distinctive curved office wall.
The project was more than a flat logo swap. The existing sign had to be replaced with a finely detailed, vertically composed identity while respecting the wall's curve, narrow flutes, furniture and close reception sightlines.
The surface challenge
The logo spans a curved feature wall formed from repeated vertical flutes, so fine letterforms could not rely on one broad, flat fixing surface.
The finished effect
Gloss black acrylic contrasts with the muted green wall and produces crisp dimensional shadows without competing with the refined interior palette.
How the replacement was resolved
Document the wall, approve the composition, then fix every letter accurately.
The Trello specification, approved mockup and owned project photography connect the previous identity to the completed August 2024 result. The gallery includes finished, before and detail views rather than claiming to document every fabrication step.
Read the four delivery stages
- 1
Review the existing sign
The previous 1650 × 750 mm identity and curved feature wall were photographed so the replacement could respond to the available zone, furniture and substrate.
- 2
Approve the new composition
The revised stacked artwork was mocked up at approximately 1600 × 1600 mm, confirming scale and balance before the individual components were prepared.
- 3
Prepare the acrylic lettering
The final identity uses 6 mm black acrylic, preserving the thin serif details and clean internal spaces of the approved artwork.
- 4
Remove, set out and install
After the earlier sign was removed, the new components were aligned across the curved flutes and secured with a combination of double-sided tape and acrylic pins.
Project anatomy
Thin black acrylic, precise set-out and a fixing method suited to the wall.
The material and installation approach were selected together. The lettering needed enough depth to read as a physical identity while retaining the fine strokes of the approved logo across a curved, textured surface.
6 mm black acrylic
Solid black acrylic keeps the colour consistent through the face and edge while giving the slender serif letterforms visible depth and a polished office finish.
Explore acrylic signsTape and acrylic pins
The documented fixing system combines double-sided tape with acrylic pins, supporting the thin components where the wall's shape prevents continuous flat contact.
Explore 3D letteringCurved fluted feature wall
The vertical flutes create a strong architectural backdrop, but they also make accurate templates, spacing and point-by-point set-out essential to a clean result.
Explore office signageMaterial decision
Why use solid acrylic lettering for this office identity?
For this non-illuminated interior, 6 mm acrylic gives the new logo clean black faces, sharp serif detail and useful physical depth without the visual weight of deeper fabricated letters.
Acrylic thickness, finish and fixing should still be reviewed for the artwork, letter stroke widths, wall profile, expected contact, viewing distance and maintenance conditions of each new project.
Pricing context
What shapes the price of a custom acrylic office logo?
Office identities are quoted to the approved artwork and actual wall. We explain the cost drivers without publishing One Buyers Agency's commercial terms.
- Overall logo dimensions, letter count and the complexity of fine artwork
- Acrylic thickness, colour, finish and component quantities
- Removal of existing signage and making the feature wall ready
- Wall profile, template complexity, fixings, access and installation timing
Send a straight-on wall photograph, approximate dimensions and vector artwork for a current indication. Final pricing follows confirmed scale, material, substrate, fixing and installation requirements.
Technical detail
The deeper project information, available when useful.
The main story stays visual and easy to scan. Open these sections for the delivered scope, the evidence in the photography and the specifications that still need a site-specific review.
The Trello record, approved mockup and owned project photographs support the following Double Bay office-signage scope.
- Review of the existing sign and curved feature wall
- Approved approximately 1600 × 1600 mm stacked logo composition
- Individual 6 mm black acrylic letter components
- Removal of the previous wall identity
- Template-led set-out and installation with tape and acrylic pins
These details belong to this One Buyers Agency project and should not be transferred to another site without review.
- Quantity: one complete dimensional wall identity
- Approximate overall size: 1600 × 1600 mm
- Material: 6 mm black acrylic
- Fixings: double-sided tape and acrylic pins
- Surface condition: curved wall with narrow vertical flutes
The letter construction and fixing method should follow the new artwork and substrate rather than this project's dimensions alone.
- Vector artwork and minimum letter-stroke widths
- Available wall zone, furniture and primary viewing approach
- Wall curve, flute depth, substrate and fixing suitability
- Existing sign removal and wall-make-good requirements
- Building access, installation hours and rollout locations
Sydney proof · National capability
A Double Bay office result that can inform multi-office branding.
This case study documents one One Buyers Agency workplace identity completed in Double Bay, Sydney. For businesses with several offices, Platinum Signs can coordinate one approved visual standard nationally while reviewing every site for dimensions, substrate, fixing, access and removal requirements.
- One approved artwork, scale and material standard
- Site-specific substrate, fixing and removal reviews
- Coordinated quality control, staging and installation
Prepare a useful brief
What to send for a dimensional office logo.
A clear first brief lets the team assess artwork detail, material thickness, fixing and installation before confirming scope and price.
Read the four-point quoting checklist
- 1
Wall photographs
Include straight-on and angled views that show the entire wall, its texture, nearby furniture and the main visitor approach.
- 2
Dimensions
Share the available width and height, plus any plans or details showing curves, flutes, battens or other surface profiles.
- 3
Vector artwork
Supply the approved logo file, colours and any brand guidance covering layout, spacing or finish.
- 4
Removal and timing
Confirm whether an existing sign must be removed, the target installation date and any building-access restrictions.
Frequently asked questions
Questions this project usually raises.
Practical answers about acrylic office lettering, curved-wall fixings, sign replacement, pricing inputs and national delivery.
The completed office identity uses individual 6 mm black acrylic letters arranged as an approximately 1600 × 1600 mm stacked logo on a curved green fluted feature wall. The previous wall sign was removed before the new identity was installed.
Yes, when the artwork, wall profile and fixing system are assessed together. This project used double-sided tape and acrylic pins because the thin letters and curved flutes did not provide one continuous flat fixing surface.
Six-millimetre acrylic creates physical depth, crisp edges and natural shadow while retaining the fine detail of the approved serif artwork. Vinyl can suit other budgets or applications, but it would not create the same dimensional result.
Price depends on overall size, letter count, artwork complexity, acrylic thickness and finish, wall profile, existing-sign removal, fixings, access and installation timing. Send photographs, dimensions and vector artwork for a current indication.
Yes. This page documents one Double Bay project, while a multi-office programme can be coordinated nationally around one approved visual standard with site-specific checks for dimensions, wall surfaces, removal, fixings, access and installation.
Related capability
Explore the services behind the One Buyers Agency result.
Use the completed Double Bay project as visual proof, then move into the sign service that matches your own office brief.
Acrylic signs
Explore solid acrylic lettering and logo formats for polished commercial and workplace identities.
Explore acrylic signsOffice signage
Plan connected reception, feature-wall, meeting-room and wayfinding signs for one workplace or many.
Explore office signage3D lettering
Compare dimensional acrylic and fabricated lettering options for logos that need physical depth.
Explore 3D letteringTrusted by
Trusted by major brands and national organisations
Platinum Signs supports retail, property, construction, infrastructure, hospitality, workplace, government, education and corporate clients across Australia.
Reviews
What our clients say
Selected Google reviews about Platinum Signs
“I have worked with Platinum Signs for years and I can only say one thing: they live up to their name! It is rare to find a company that has the capability to become a true extension of your business.”
“The communication of Platinum Signs was just amazing, as was the finished product. Our client was immensely pleased at how the architect's drawings were brought to life. We have already recommended Platinum Signs to our other clients.”
“I've worked with Platinum Signs on two projects now and both have definitely exceeded my expectations. Yago and the team have consistently delivered.”
Office signage and rollouts
Planning a dimensional office identity or replacing an old sign?
Send your wall photographs, approximate dimensions, vector artwork and location list. We will help define the right acrylic thickness, set-out, fixings and installation approach.